Abstract:In this experimental study, involving deuterium–deuterium fusion neutron emission spectroscopy measurement on the experimental advanced superconducting tokamak (EAST), a liquid scintillator detector (BC501A) was employed. This decision was based on the detector's superior sensitivity, optimal time-response, and its exceptional n–γ discrimination capability. This detector emits fast pulse signals that are as narrow as 100 ns, with high count rates that can peak at several Mcps. However, conventional nuclear circuits faced challenges in performing pulse height analysis, n–γ pulse shape discrimination, and in recording the entire pulse waveform under such high count rate conditions. To address these challenges, a high-speed digital pulse signal acquisition and processing system was designed. The system was developed around a micro-telecommunications computing architecture. Within this structure, a signal acquisition and processing (SAQP) module communicated through PCI Express links, achieving a bandwidth of up to 1.6 GB/s. To accurately capture the detailed shape of the pulses, four channels of analog-to-digital converters were used, each with a 500-MSPS sampling rate and a 14-bit resolution, ensuring an accuracy that surpassed 11 bits. An n–γ discrimination algorithm, based on the two-gate integral method, was also developed. Implemented within field programmable gate arrays, this algorithm provided a real-time n–γ discrimination spectrum for pulse height analysis. The system underwent rigorous testing in a laboratory setting and during an EAST experiment. The results confirmed that the innovative SAQP system can satisfy the demanding requirements of high-parameter experiments, manage count rates of up to 2 Mcps, execute real-time n–γ discrimination algorithms, and record entire pulse waveforms without any data loss.

Prototype of the Digital Hardware Trigger System for TAO Central Detector

Design and Implementation of TAO DAQ System

Design of trigger test board for the Daya Bay neutrino experiment

Design of the ASIC readout scheme for the JUNO-TAO experiment

SiPM and readout electronics for the JUNO-TAO Central Detector

The Trigger and Timing System of the Double Chooz Experiment

First-principle Event Reconstruction by Time-Charge Readouts for the Taishan Antineutrino Observatory

Design of the Local Trigger Board for the Daya Bay Reactor Neutrino Experiment

A high-resolution TDC-based board for a fully digital trigger and data acquisition system in the NA62 experiment at CERN

Performance of the plastic scintillator modules for the top veto tracker of the Taishan Antineutrino Observatory

TAO -- The Taishan Antineutrino Observatory

Design of a Time-to-Digital Converter ASIC and a mini-DAQ system for the Phase-2 upgrade of the ATLAS Monitored Drift Tube detector

A Topological Trigger System for Imaging Atmospheric-Cherenkov Telescopes

Design of Prototyping PMT Electronic System for Daya Bay Reactor Neutrino Experiment

The Clock and Control System for the ATLAS Liquid Argon Calorimeter Phase-I Upgrade

Development of a high-speed digital pulse signal acquisition and processing system based on MTCA for liquid scintillator neutron detector on EAST

System design and prototyping of the CMS Level-1 Trigger at the High-Luminosity LHC

A ROOT based detector geometry and event visualization system for JUNO-TAO

Design and performance of a TDC ASIC for the upgrade of the ATLAS Monitored Drift Tube detector

Calibration strategy of the JUNO-TAO experiment

Design, Characterization, and Sensitivity of the Supernova Trigger System at Daya Bay