Abstract:For tracking and tagging the cosmic-ray muon (CR-muon), the Taishan Antineutrino Observatory (TAO) experiment is equipped with a top veto tracker (TVT) system composed of 160 modules, each consisting of plastic scintillator (PS) strip as target material, embedded wavelength shifting fiber (WLS-fiber) as photon collection and transmission medium, and silicon photomultipliers (SiPMs) at both ends as read-out. This article introduces the unique design of the module and reports the excellent performance of all modules, providing guidance and important reference for the process design of scintillation detectors with WLS-fibers. In general, when the CR-muon hits the center of plastic scintillator and without optical grease, the most probable value of the signal amplitude at one end of the PS strip is greater than 40.8 p.e. and 51.5 p.e. for all the 2 m-length modules and 1.5 m-length modules respectively. The CR-muon tagging efficiency of PS module is measured to be more than 99.3%, which meets the requirement of TAO.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is how to efficiently identify and exclude background events caused by cosmic - ray muons (CR - muon) in the Taishan Anti - neutrino Observatory (TAO) experiment. Specifically, the paper focuses on the design and performance evaluation of the plastic scintillator (PS) modules in the top veto tracker (TVT) system to ensure that muons passing through the main detector can be effectively marked, thereby reducing their impact on experimental data. The main objectives of the paper include: 1. **Design Optimization**: Introduce the unique design of PS modules, including the use of embedded wavelength - shifting fibers (WLS - fiber) and silicon photomultipliers (SiPMs) as read - out devices, and how these designs improve the performance of the system. 2. **Performance Testing**: Report the performance test results of PS modules under different conditions, especially detailed data in aspects such as signal amplitude, light yield, effective attenuation length, and coupling effect. 3. **Detection Efficiency**: Measure and analyze the muon - tagging efficiency of PS modules under different threshold conditions, and verify whether it meets the requirements of the TAO experiment, that is, the muon - tagging efficiency needs to exceed 99%. ### Main Research Contents 1. **Module Design**: - Describe the structure of PS modules, including modules of two sizes, 2000mm and 1500mm. - Introduce the manufacturing process of the modules, including material selection, fiber layout, and packaging methods. 2. **Testing System**: - Describe in detail the system used for performance testing, including the CR - muon monitoring system and signal read - out devices. - Introduce the data acquisition system used in the testing process, such as high - resolution oscilloscopes and high - precision time - amplitude digitizers (MDPP - 32 - QDC). 3. **Performance Evaluation**: - Test the light yield of PS modules at different positions, especially the signal intensity when muons pass through the center and both ends of the modules. - Calculate the effective attenuation length of the modules by fitting the Landau distribution and verify that it meets the design requirements. 4. **Detection Efficiency**: - By setting different thresholds, measure the muon detection efficiency of PS modules under single - end, two - end sum, and two - end "AND" logic. - Analyze the detection efficiency at different positions and verify that the detection efficiency of all modules exceeds 99.3%. ### Conclusion Through detailed experiments and data analysis, the paper demonstrates the excellent performance of PS modules in the TAO experiment, especially achieving the expected goals in terms of muon - tagging efficiency. These results not only provide important technical support for the TAO experiment but also provide valuable references for the design and performance evaluation of other similar experiments.

Performance of the plastic scintillator modules for the top veto tracker of the Taishan Antineutrino Observatory

Design Optimization of Plastic Scintillators with Wavelength-Shifting Fibers and Silicon Photomultiplier Readouts in the Top Veto Tracker of the JUNO-TAO Experiment

Study in the Optical Performance of Plastic Scintillator with WLS Fiber

Design optimization of JUNO-TAO plastic scintillator with WLS-fiber and SiPM readout

Electronics design for a muon imaging system using triangular plastic scintillators with WLS fiber readouts

Performance simulation study of plastic scintillator arrays for stability monitoring applications

Measure Pet Detector Performance with the Intrinsic Radioactivity of Scintillator

Prototype of the Digital Hardware Trigger System for TAO Central Detector

Discriminating cosmic muons and radioactivity using a liquid scintillation fiber detector

SiPM and readout electronics for the JUNO-TAO Central Detector

Performance of the Mass Testing Setup for Arrays of Silicon Photomultipliers in the TAO Experiment

High efficiency muon registration system based on scintillator strips

Burn-in Test and Thermal Performance Evaluation of Silicon Photomultipliers for the JUNO-TAO Experiment

Studies of Prototype CsI(Tl) Crystal Scintillators for Low-Energy Neutrino Experiments

Design of the ASIC readout scheme for the JUNO-TAO experiment

Performance of Scintillator Counters with Silicon Photomultiplier Readout

Performance of a SiPM Based Semi-Monolithic Scintillator PET Detector

First-principle Event Reconstruction by Time-Charge Readouts for the Taishan Antineutrino Observatory

Performance of the wavelength-shifting fiber upgrade for the Mu2e cosmic-ray veto detector

Design and test for the CEPC muon subdetector based on extruded scintillator and SiPM

A Novel Sub-Millimeter Resolution Pet Detector with Tof Capability