Abstract:Muon imaging technology has developed rapidly over the past decades with extensive applications. In many cases, plastic scintillator detectors are preferred because of their high cost performance, ease of processing and robustness in harsh environments. To reduce imaging time and improve imaging quality, detectors tend to have large areas and high position resolutions. The challenge to the electronics for such detectors is to maintain the scale of electronics acceptable while improving the high position resolution of the detector. In this paper, the basic detector unit is a triangular strip of plastic scintillator, each embedded with two wavelength-shifting (WLS) fibers read out by the silicon photomultipliers (SiPMs). Since the hit position of muon on the detector is determined by the splitting ratio of the scintillation light on two adjacent scintillator strips, it is necessary the readout electronics has high linearity and low noise. The possibility of the electronics channel multiplexing on the same detector plane is fully explored so that four WLS fibers can be read out by one SiPM realizing 2:1 readout channel compression. Furthermore, since multiple electronics modules are connected by a daisy chain structure, the electronics system is very scalable with its data acquisition system (DAQ) independent of detector size. In addition to detailing the position encoding readout scheme, the design of electronics module and the DAQ system, the electronics system has been implemented and applied to a prototype detector for performance evaluation. Using scintillator strips with 11 mm pitch size, the position resolution of the detector reaches 1.49 mm, which demonstrates that the designed electronics is suitable for the new detector structure, and the combination of the two has a good application prospect in muon imaging.

Study in the Optical Performance of Plastic Scintillator with WLS Fiber

Design optimization of JUNO-TAO plastic scintillator with WLS-fiber and SiPM readout

Design Optimization of Plastic Scintillators with Wavelength-Shifting Fibers and Silicon Photomultiplier Readouts in the Top Veto Tracker of the JUNO-TAO Experiment

Fast Muon Simulation in the JUNO Central Detector

Discriminating cosmic muons and radioactivity using a liquid scintillation fiber detector

Position-sensitive plastic scintillator detector with WLS-fiber readout

Performance of the plastic scintillator modules for the top veto tracker of the Taishan Antineutrino Observatory

Electronics design for a muon imaging system using triangular plastic scintillators with WLS fiber readouts

Performance of the wavelength-shifting fiber upgrade for the Mu2e cosmic-ray veto detector

Simulation study of the light collection efficiency and the dependency on position resolution in plastic scintillator-based muography detectors

Compact cosmic ray muon scattering imaging system based on plastic scintillating fibers

Readout Electronics Design for a Cosmic Ray Muon Imaging System

Development of an Organic Plastic Scintillator based Muon Veto Operating at Sub-Kelvin Temperatures for the NUCLEUS Experiment

Qualification study of SiPMs on a large scale for the CMVD Experiment

The cosmic ray muons tomography system with wavelength shifting fiber and plastic scintillator plane and vertical borehole detectors and improved 3d image reconstruction algorithm: a simulation study

Design and test for the CEPC muon subdetector based on extruded scintillator and SiPM

Performance simulation study of plastic scintillator arrays for stability monitoring applications

Performance of Scintillator Counters with Silicon Photomultiplier Readout

A plastic scintillation muon veto for sub-Kelvin temperatures

Characterization of Silicon-Photomultipliers for a Cosmic Muon Veto detector