Abstract:Joining is crucial for ultra-high temperature ceramics (UHTCs) to be used in demanding environments due to the difficulty in manufacturing large and complex ceramic components. In this study, ZrB2-SiC composite UHTCs parts were joined via Ni foil as filler, and the mechanical properties and oxidation behaviour of the fabricated ZrB2-SiC/Ni/ZrB2-SiC (ZS/Ni/ZS) joint were investigated. Firstly, dense ZrB2-SiC composites were prepared from nano-sized powders by spark plasma sintering (SPS). The ZrB2-SiC parts were then joined using SPS. Furthermore, the elastic modulus, hardness, shear strength and high temperature oxidation behaviour of the ZS/Ni/ZS joint were examined to evaluate its properties and performance. The experimental results showed that the ZrB2-SiC parts were effectively joined via Ni foil using SPS and the resultant microstructures were free from any marked defects or residual metallic layers in the joint. Although the elastic modulus and hardness in the joining zone were lower than those in the base ZrB2-SiC ceramics, the shear strength of the joint reached ∼161 MPa, demonstrating satisfactory mechanical properties. Oxidation tests revealed that the ZS/Ni/ZS joint possesses good oxidation resistance for a wide range of elevated temperatures (800–1600 oC), paving the way for its employment in extreme environments.

Characteristics and mechanisms of dynamic oxidation for ZrB2-SiC based UHTC

Characteristics and Mechanisms of Dynamic Oxidation for Zrb2-Sic Based Uhtc

Ablation resistance behavior of ZrB2-SiC ultra-high temperature ceramics with Y2O3 addition

Study on Thermal Shock Resistance and Oxidation Resistance of Ultra-High Temperature Ceramics

Effect of SiC Content on the Ablation and Oxidation Behavior of ZrB2-Based Ultra High Temperature Ceramic Composites

Oxidation Behaviors of ZrB2 Based Ultra-High Temperature Ceramics under Compressive Stress

Ablation behaviors of ultra-high temperature ceramic composites

High-temperature Oxidation Behavior of Monolithic Zr3[Al(Si)]4C6 and Its Composite Incorporating 30vol% ZrB2-SiC: Providing a Basis for Broadening the Service Temperature

Effect of Various Additives on the Oxidation Behavior of ZrB2‐Based Ultra‐High‐Temperature Ceramics at 1800°C

The addition of lanthanum hexaboride to zirconium diboride for improved oxidation resistance

A Technique for Ultrahigh Temperature Oxidation Studies of Zrb2-Sic

High‐Temperature Oxidation at 1900°C of ZrB2–xSiC Ultrahigh‐Temperature Ceramic Composites

Improving the Comprehensive Properties of ZrO2–C Materials with Aid of TiO2 Addition

Mechanisms responsible for enhancing low‐temperature oxidation resistance of nonstoichiometric (Zr,Ti)C

An experimental study of ultra-high temperature ceramics under tension subject to an environment with elevated temperature, mechanical stress and oxygen

Fabrication and Characterisation of High-Performance Joints Made of ZrB2-SiC Ultra-High Temperature Ceramics

Research and Development of ZrB2-based Ultra-high Temperature Ceramics

Oxidation behavior of zirconium diboride–silicon carbide at 1800°C

Effects of Oxidation Temperature, Time, and Ambient Pressure on the Oxidation of ZrB2–SiC–graphite Composites in Atomic Oxygen

Oxidation Resistance of Zr2(Al(Si))4C5-based Composites at Ultra-High Temperature

Design and Preparation of an Ultra-High Temperature Ceramic by In-Situ Introduction of Zr2[Al(Si)]4C5 into ZrB2-SiC: Investigation on the Mechanical Properties and Oxidation Behavior