Abstract:Abstract Finding the optimum balance between strength and toughness, as well as acquiring reliable thermal shock resistance and oxidation resistance, has always been the most concerned topic in the discussion of ultra-high temperature ceramic composites. Herein, PyC modified 3D carbon fiber is used to reinforce ultra-high temperature ceramic (UHTC). The macroscopic block composite with large size is successfully fabricated through low temperature sintering at 1300 °C without pressure. The prepared PyC modified 3D C f /ZrC-SiC composites simultaneously possess excellent physical and chemical stability under the synergistic effect of PyC interface layer and low temperature sintering without pressure. The fracture toughness is increased in magnitude to 13.05 ± 1.72 MPa·m 1/2 accompanied by reliable flexural strength of 251 ± 27 MPa. After rapid thermal shock spanning from room temperature (RT) to 1200 °C, there are no visible surface penetrating cracks, spalling, or structural fragmentation. The maximum critical temperature difference reaches 875 °C, which is nearly three times higher than that of traditional monolithic ceramics. The haunting puzzle of intrinsic brittleness and low damage tolerance are resolved fundamentally. Under the protection of PyC interface layer, the carbon fibers around oxide layer and matrix remain structure intact after static oxidation at 1500 °C for 30 min. The oxide layer has reliable physical and chemical stability and resists the erosion from fierce oxidizing atmosphere, ensuring the excellent oxidation resistance of the composites. In a sense, the present work provides promising universality in designability and achievement of 3D carbon fiber reinforced ceramic composites.

An experimental study of ultra-high temperature ceramics under tension subject to an environment with elevated temperature, mechanical stress and oxygen

Monotonic Tension Behavior of 2D Woven Oxide/oxide Ceramic Matrix Composites at Ultra-High Temperature

Mechanical properties and fracture behavior of ultrahigh temperature ceramics at ultrahigh temperatures

Oxidation Behaviors of ZrB2 Based Ultra-High Temperature Ceramics under Compressive Stress

Study on Thermal Shock Resistance and Oxidation Resistance of Ultra-High Temperature Ceramics

In-situ reaction syntheis and mechanical properties of ultra high temperture ceramics

Mechanical Behaviors of Ultra-High Temperature Ceramics

Fabrication and Characterisation of High-Performance Joints Made of ZrB2-SiC Ultra-High Temperature Ceramics

Fabrication of carbon fiber reinforced ceramic matrix composites potential for ultra-high-temperature applications

Ultrahigh‐temperature tensile behaviors of ZrB2–SiC ceramics

Tensile Mechanical Behavior and Failure Mechanism of a Plain-Woven SiCf/SiC Composites at Room and Elevated Temperatures

Microstructure and mechanical properties of ZrB2-based UHTC via reactive hot pressing

Microstructure, mechanical properties, and reinforcement mechanism of carbide toughened ZrC-based ultra-high temperature ceramics: A review

Effect of tensile stress on thermal fatigue life of ZrB2-SiC-graphite composite

Compressive experimental method and properties of C/C composites under ultra-high temperature environment

Experimental Study of High-Temperature Tensile Mechanical Properties of 3D Needled C/C–SiC Composites

High‐temperature tensile strength and fracture behavior of ZrB2‐SiC‐graphite composite

Using PyC modified 3D carbon fiber to reinforce UHTC under low temperature sintering without pressure

Ultra-high-temperature Tensile Properties and Fracture Behavior of ZrB2-based Ceramics in Air above 1500°C

Effect of Environment Atmosphere on Thermal Shock Resistance of the ZrB2–SiC–graphite Composite