Abstract:Zirconium diboride (ZrB2 ) is considered as one of the most promising ultra-high temperature materials for the applications in extreme environments. However, the difficulty in fabrication of ZrB2 limits its industrial applications. In this study, fully dense and grain-refined ZrB2 is prepared under ultra-high pressure of 15 GPa at low temperature of 1450 °C. The as-prepared ZrB2 exhibits excellent mechanical and oxidation-resistant properties. Compared with raw powder, the grain size decreases 56%. Compared with high-temperature sintered control specimen beyond 2000 °C, the hardness and fracture toughness increase about 46% and 69%, respectively, the dislocation density increase 3 orders of magnitude, while the grain size considerably decrease 96%. According to work hardening, Hall-Petch and Taylor dislocation hardening effects, the refined grains, substructures, and high dislocation density caused by plastic deformation during sintering can enhance the mechanical properties. The unique structure contributes to a threshold oxidation temperature increase of ≈250 °C relative to the high-temperature sintered ZrB2 , achieving one of the highest values (1100 °C) among the reported monolithic ultra-high temperature ceramics. A developed densification mechanism of dislocation multiplication with grain refining is proposed and proved to dominate the sintering, which is responsible for simultaneous improvements in mechanical and oxidation-resistant properties.

Oxidation Behaviors of ZrB2 Based Ultra-High Temperature Ceramics under Compressive Stress

High temperature oxidation resistance of hot-pressed h-BN/ZrO 2 composites

An experimental study of ultra-high temperature ceramics under tension subject to an environment with elevated temperature, mechanical stress and oxygen

High Temperature Flexural Strength and Oxidation Behavior of Hot-Pressed B4C–ZrB2 Ceramics with Various ZrB2 Contents at 1000–1600 °C in Air

Oxidation Behavior of ZrB2–SiC–ZrO2 Ceramic Composites in the Temperature Range of 800–1200°C

High-temperature Oxidation Behavior of Monolithic Zr3[Al(Si)]4C6 and Its Composite Incorporating 30vol% ZrB2-SiC: Providing a Basis for Broadening the Service Temperature

Enhanced Mechanical Properties and Oxidation Resistance of Zirconium Diboride Ceramics via Grain‐Refining and Dislocation Regulation

High‐Temperature Oxidation at 1900°C of ZrB2–xSiC Ultrahigh‐Temperature Ceramic Composites

Effect of Surface Oxidation on Thermal Shock Resistance of the ZrB2–SiC–ZrC Ceramic

High-Temperature Oxidation and Ablation Behavior of (zr1/3hf1/3ti1/3)c Ceramic

Ablation resistance behavior of ZrB2-SiC ultra-high temperature ceramics with Y2O3 addition

Mechanical properties and fracture behavior of ultrahigh temperature ceramics at ultrahigh temperatures

Design and Preparation of an Ultra-High Temperature Ceramic by In-Situ Introduction of Zr2[Al(Si)]4C5 into ZrB2-SiC: Investigation on the Mechanical Properties and Oxidation Behavior

Characteristics and mechanisms of dynamic oxidation for ZrB2-SiC based UHTC

Effect of Surface Oxidation on Thermal Shock Resistance of ZrB 2 –sic–zrc Ceramic at Temperature Difference from 800 to 1900 °C

Research Progress on Antioxidant Activity of ZrB2-based Ultra High Temperature Ceramics

Ultra-high-temperature Tensile Properties and Fracture Behavior of ZrB2-based Ceramics in Air above 1500°C

Oxidation Properties of ZrB2-20vol.%SiC-10vol.%BN Ceramic Composite at 1200°C

Oxidation behavior of zirconium diboride–silicon carbide at 1800°C

Oxidation behavior of ZrB 2-SiC ultra-high temperature ceramics under low atmospheric pressure