Abstract:The mechanical and twinning behavior of Mg alloys containing a monolithic texture component have been extensively studied; however, studies on samples with multi texture components are much insufficient. In this study, the quantitative relationship between the mechanical behavior under tension along the extrusion direction (ED) of Mg AZ31 rods and the percentages of bimodal texture components <0002>// ED (19–87%) and <0002>⊥ED were systematically studied. The component <0002>// ED favors <math>{101¯2}</math> twinning and is soft orientations; however, the component <0002>⊥ED favors prismatic slip and is hard orientations. The results show that the yield strength does not decrease linearly with an increase in the percentage of the soft orientations and show a deviation from the calculations using the conventional rule of mixtures. A higher percentage of the soft grains increases this deviation when the percentage is below 50%, and decreases it over 50%. The ultimate strengths, however, do not show an obvious dependence on the percentage of the soft orientations. Subsequently, the corresponding mechanisms are discussed and a modified rule of mixtures was developed. Bimodal texture components stimulate the activation of <math>{101¯2}</math> twin variants with a low Schmid factor and the presence of more variants within one grain. Conventional strain accommodation rule was used to analyze this twinning behavior, but it cannot explain the experimental observations. Crystal-plasticity based finite element modeling was employed to analyze this strange twinning behavior. The results indicate that the interaction among twin variants, rather than deformation in neighboring grains, plays a major role in the activation of twins with a low Schmid factor, due to a hard deformation propagation from the soft grains to the hard grains. This finding provides an important complementation to the strain accommodation theory.

Microstructure and micro-texture evolution of compression twins in magnesium

Three-dimensional study of grain scale tensile twinning activity in magnesium: A combination of microstructure characterization and mechanical modeling

Microtexture Evolution Via Deformation Twinning and Slip During Compression of Magnesium Alloy AZ31

Three-dimensional study of grain scale tensile twinning activity in Mg: A combination of microstructure characterization and mechanical modeling

Effects of deformation twins on microstructure evolution, mechanical properties and corrosion behaviors in magnesium alloys - A review

EBSD Analysis and Theoretical Prediction of Twin Orientations During Compression in Mg-3Al-1Zn

Influence of precipitation on tension and compression twinning in Mg-6.5Zn alloy

The Effect of Tension Twin on the Dynamic Recrystallization Behavior in Polycrystal Magnesium by Atomistic Simulation

Twin recrystallization mechanisms in magnesium-rare earth alloys

Towards understanding double extension twinning behaviors in magnesium alloy during uniaxial tension deformation

Quantitative investigation on the {10–12} twinning-detwinning behavior and twinning transfer of an extruded Mg-2.8Y sheet during compression-tension loading via quasi-in-situ EBSD observation

Towards Understanding {10-11}-{10-12} Secondary Twinning Behaviors in AZ31 Magnesium Alloy during Fatigue Deformation

Study on the Twinning/De-twining Behavior of Different Types of Twin–Twin Interaction via Experiments and Molecular Dynamics Simulation

Twin recrystallization mechanisms in a high strain rate compressed Mg-Zn alloy

Towards revealing the relationship between deformation twin and fatigue crack initiation in a rolled magnesium alloy

Twinning Behavior, Microstructure Evolution and Mechanical Property of Random-Orientated ZK60 Mg Alloy Compressed at Room Temperature

On the interaction of precipitates and tensile twins in magnesium alloys

Application of machine learning to assess the influence of microstructure on twin nucleation in Mg alloys

Microstructure Evolution of AZ91D Magnesium Alloy During High Temperature Compression

A quantitative study on mechanical behavior of Mg alloys with bimodal texture components

Crystal plasticity-based finite element modeling of twin transmission across grain boundaries in magnesium