Abstract:This paper reports a novel MEMS accelerometer whose effective stiffness can be adjusted flexibly and even tuned to almost zero by using the electrostatic softening effect of two parallel plate capacitors: the comb-finger capacitor and the triangular capacitor. When applied to a biased voltage, the comb-finger capacitor provides a relatively large and nonlinear negative stiffness in the gap-varying direction, while the triangular capacitor produces a small yet linear negative stiffness in the area-varying direction. The proposed accelerometer is fabricated by using a standard silicon-on-glass manufacturing process and controlled by a customized digital circuit. An analytical model based on the pull-in dynamics as a result of the stiffness tuning is developed and simulated to investigate the dynamic behavior of the nonlinear accelerometer system. The proportion integral differential controller is utilized to improve the performance of the accelerometer while maintaining the stability of the closed-loop system operating with extremely low effective stiffness. The experimental results indicate that a two-fold increase of the sensitivity, a 30% reduction of Allan deviation bias instability, and a 20% reduction of Allan velocity random walk are achieved for the open-loop accelerometer system. A 75% decrease of the standard deviation bias instability and nearly two orders of magnitude improvement of the noise floor at 1 Hz for the closed-loop accelerometer system are realized when the effective stiffness is reduced to almost zero.

A Novel Capacitive Biaxial Microaccelerometer Based on the Slide-Film Damping Effect

Study of a Novel Micromachined Capacitive Accelerometer

An In-Plane Low-Noise Accelerometer Fabricated with an Improved Process Flow

Monolithic Integrated Micro-Opto-Electromechanical Accelerometer Based on Michelson Interferometer Structure

A Stiffness-Tunable MEMS Accelerometer

Mechanical Design Optimization of A Single-Axis Moems Accelerometer Based on A Grating Interferometry Cavity for Ultrahigh Sensitivity

A Novel Sandwich Capacitive Accelerometer with A Double-Sided 16-Beam-mass Structure

A Novel Capacitive Accelerometer with A Highly Symmetrical Double-Sided Beam-Mass Structure

Piezoresistive Slot-Cantilever Type Accelerometer Inspired from Spider'S Slit Sensilla

A Novel Biaxial Resonant Micro Accelerometer with Microleverage Mechanism

Design and Fabrication of a Micro-Electromechanical System Sandwich Capacitive Accelerometer

A Novel Z-Axis Capacitance Accelerometer with Highly Symmetrical 16-Beam Structure

A Novel Tunable Lateral Sensing Capacitive Silicon Micromachined Accelerometer with High Sensitivity

A Highly Sensitive Biaxial Resonant Accelerometer with Two-Stage Microleverage Mechanisms

Design and Fabrication of a Highly Symmetrical Capacitive Triaxial Accelerometer

High-Performance Single-Side Fabricated (111)-Silicon Dual-Cantilever Accelerometer with Squeeze-Film Air Damping Modulation

A High-Performance Micromachined Piezoresistive Accelerometer with Axially Stressed Tiny Beams

A Novel Tri-Axial Piezoelectric MEMS Accelerometer with Folded Beams

Design and Simulation of Capacitive, Piezoresistive and Piezoelectric Triaxial Accelerometers Using a Highly Symmetrical Quad-Beam Structure

A Micromechanical Structure Eliminating Lateral Effect of Silicon Accelerometer

A New Symmetrical Beam-Mass Structure for Accelerometers by Anisotropic Etching Without Convex Corner Compensation