Abstract:The corrosion of materials in sea environment are generally caused by salt spray, tidal action and adhesion of marine organisms. It is necessary to ensure the materials possess the required strength and good corrosion resistance during operation. Although the existing Ni-W-P electroless plating can provide a certain degree of corrosion protection, its corrosion resistance is still limited under harsh marine condition. SiO2 nanoparticles have received extensive concern due to their excellent corrosion resistance, which has been considered as potential candidates for enhancing corrosion resistance in multicomponent electroless coatings. In this study, the electroless Ni-W-P coatings with SiO2 nanoparticles co-deposition on the Q235 substrate was prepared. The coating was characterized through scanning electron microscopy (SEM), X-ray diffraction (XRD), polarization techniques, and electrochemical impedance spectroscopy (EIS). As a result, the Ni-W-P coating co-deposited with SiO2 nanoparticles demonstrates superior corrosion resistance compared to the pure Ni-W-P coating. The surface of SiO2 nanoparticles contain three distinct bonded hydroxyl functional groups, which can influence the ionic reaction in the plating solution and the deposition of elements in the coating. After modified by PVA, it can be uniformly dispersed in the coating, and the composite coating with SiO2 nanoparticles co-deposited is transformed into a nanocrystalline structure. The even distribution of SiO2 nanoparticles fill the defects within the coating, leading to a reduction in porosity, permeability, and susceptibility to penetration of corrosive media. Concurrently, the nanoparticles facilitate surface passivation, forming a stable interface with substrate and coating that inhibits electrochemical reactions and diminishes the rate of self-corrosion reactions. The good and stable corrosion resistance is achieved at the SiO2 concentration of 9 g/L and PVA concentration of 1.08 g/L. These findings offer valuable insights for addressing corrosion challenges in the field of marine engineering.

Study on property of electroless plating Ni-W-P coating

Fabrication and performance of Ni-Co-P/Si3N4 electroplated composite coatings on al-si alloys

Comparative Study on Microstructure and Properties of Electroless Ni-P and Ni-W-P Coatings

MICROSTRUCTURE AND PROPERTIES OF Ni - P COATING BY ELECTROLESS PLATING

Optimization of Ni-P Alloy Electroless Plating Process

Study on Electroless Plating Ni-W-P Ternary Alloy with High Tungsten from Compound Complexant Bath

Experimental Research on the Properties of Electroless Nickel Coating

Study of properties of Ni-base nano-ZrO2 composite plating coatings

Preparation and Properties of Ni–W Composite Coatings Reinforced by Graphene Nanoplatelets

Study on Process Optimization of Electroless Ni-P Plating on Binderless WC

Mechanical properties of Ni-based coatings fabricated by electroless plating method

Parameter Optimization for Electroless Ni–W–P Coating

Study on the use of furan epoxide modified graphene to enhance the corrosion resistance and wear resistance of electroless Ni-W-P coatings

The Research on Technology of Electroless Ni-W-P Ternary Alloys Plating on the Aluminium Alloy

Microstructure and wear properties of crystalline W alloy coatings prepared by electrodeposition

Wear and Corrosion Properties of Crystalline Ni-W Alloy Coatings Prepared by Electrodeposition

Preparation of laminar α-ZrP nanosheets enhanced Ni W nanocomposite coating and investigation of its mechanical and anti-corrosion properties

Preparation and properties of Ni-W-P-TiO2 nanocomposite coatings developed by a sol-enhanced electroplating method

Investigation on corrosion resistance of electroless Ni-W-P coatings co-deposited with SiO2 nanoparticles

The Process for Electroplating of Zinc-Nickel Alloy Coating and Corrosion Resistance of the Coating

Ni-Ce-P Electroless Plating and Properties of the Coating on 27simn Steel