Abstract:Ni-P alloy coatings with tunable phosphorus contents are electrodeposited at room temperature using choline chloride: ethylene glycol (1: 2 molar ratio) deep eutectic solvent and NiCl2 center dot 6H(2)O, NaH2PO2 center dot H2O as nickel and respectively phosphorous sources. Cyclic voltammetry shows that the presentence of H2PO2- in the ionic liquid based Ni plating bath promotes the initiation of Ni-P nucleation. Chronoamperometric results indicate that the electrodeposition of Ni and Ni-P alloys on a platinum electrode follows the mechanism of instantaneous nucleation and three-dimensional growth with diffusion-controlled. Surface morphology and chemical composition of the alloy coatings are significantly dependent on the molar ratio of H2PO2-/Ni2+ in the electrolyte. Moreover, deposition potential and time have a remarkable effect on the surface morphology of deposits. X-ray diffractometer analysis indicates that the structure of alloys converts from crystalline to amorphous structure as the phosphorus content in the coating increases. Potentiodynamic polarization measurements show that the alloy coating exhibits the nobler corrosion potential and the lower corrosion current density compared with the Ni coating. The more phosphorus content the Ni-P coating has, the more positive corrosion potential and the lower corrosion current density the coating exhibits. (C) 2012 The Electrochemical Society. [DOI: 10.1149/2.012211jes] All rights reserved.

Optimization of Ni-P Alloy Electroless Plating Process

Fabrication and performance of Ni-Co-P/Si3N4 electroplated composite coatings on al-si alloys

Optimization of the Electroplating Process for Amorphous Nickel- Phosphorus Alloy

Process for Nickel-Phosphorous Pulse Electroplating and Corrosion Resistance of the Alloy Coating

A Method for Electroless Nickel Plating on Aluminum Alloy Surface

CHEMICAL PLATING MECHANISM IN ACID BATHS AND FABRICATION OF Ni-P COATING WITH HIGH P CONTENT

Preparation of Amorphous Nickel-Phosphorus Alloy Coating by Electroplating

Effect of nickel immersion pretreatment on the corrosion performance of electroless deposited Ni–P alloys on aluminum

Effect of electroless deposition on the corrosion resistance property for NdFeB permanent magnets with surface coating of Ni-P alloy

Electroless Deposition of Ni-Co-P Deposit on NdFeB Permanent Magnets and Its Corrosion Resistance Property

Electrochemical Synthesis and Characterization of Ni–P Alloy Coatings from Eutectic–Based Ionic Liquid

Electroplating and Physicochemical Properties of Zinc–Nickel Alloy Coatings from Ammonium Oxalate Electrolytes

Ni-P coatings electroplating - A review, Part I: Pure Ni-P alloy

Influence of Plating Temperature on the Morphology,Hardness and Corrosion Resistance of Electroless Ni-P Alloy Plating

Influence of pretreatments on physicochemical properties of Ni-P coatings electrodeposited on aluminum alloy

Study on Electroless Plating Ni-W-P Ternary Alloy with High Tungsten from Compound Complexant Bath

Coating process conditions of W alloy electrodeposition

Optimization of the Corrosion Resistance of Electroless Ni–W–P Coatings on Magnesium Alloys by the Response Surface Methodology

The Research on Technology of Electroless Ni-W-P Ternary Alloys Plating on the Aluminium Alloy

Composite Electroless Nickel-nano Al2O3 Coatings on Steel Substrate

Preparation and Properties of Textured Ni–W Coatings Electrodeposited on the Steel Surface from a Pyrophosphate Bath