Abstract:High -strength concrete (HSC) suffers severe shrinkage, which deteriorates the structural safety of buildings over time. Therefore, this study aims to search for indexes that could reflect the development of early drying shrinkage in HSC with different types/quantities of minerals. The influences of minerals on the internal pore structure and water evaporation of HSC were investigated by experimental work, whose correlation with early drying shrinkage was clarified. The results indicated that pore size distribution (PSD) and water evaporation of HSC should be taken into account simultaneously, facilitating the proposal of a two -factor parameter, rs, and a smaller rs was accompanied by greater drying shrinkage of samples. In addition, only partial mesopore lost water that led to drying shrinkage of HSC instead of water in all mesopores. Finally, an early drying shrinkage model of HSC based on rs was established correspondingly, which was in line with the experimental data, showing great accuracy, suitability and values in practice in reflecting early drying shrinkage behaviors of the HSC selected in this study. However, the current model is based on pore structure parameters obtained from mercury intrusion porosimetry (MIP). The backscattered electron image analysis (BSE-IA) measurement of pore structure indicates that MIP underestimates the content of pores larger than 200 nm. Therefore, the actual parameter rs should be greater than the currently calculated value. In the future, with the development of pore structure testing techniques, a more accurate rs value that closely represents the true value should be obtained, and a more universal model that considers several factors should be established.

Autogenous Shrinkage Measuring of Concrete and Model Analysis

Influence of Mineral Admixtures on early Shrinkage of Ordinary Concrete

Shrinkage and Creep of Sustainable Self-Compacting Concrete with Recycled Concrete Aggregates, Fly Ash, Slag, and Silica Fume

THE AUTOGENOUS SHRINKAGE OF CONCRETES PREPARED WITH THE BINDERS CONTAINING DIFFERENT KINDS OF MINERAL ADMIXTURE

The influence of W/B ratio and fly ash addition on the autogenous shrinkage of concrete with same strength

Influences of Water-binder Ratio and Dosage of Fly Ash on Autogeneous Shrinkage of Shrinkage-Compensating Concrete

A study on early shrinkage of recycled concrete

Identification of Indexes That Could Reflect Early Drying Shrinkage of High Strength Concrete with Minerals

Influence of Shrinkage Retarder on Early Self-Shrinking of Concrete

Experimental and Theoretical Studies on Autogenous Shrinkage of Concrete at Early Ages

Unified shrinkage model for concrete from autogenous shrinkage test on paste with and without ground-granulated blast-furnace slag

The Influence of Fly Ash Addition on the Autogenous Shrinkage of High-Strength Concrete

Numerical study of the autogenous shrinkage of cement pastes with supplementary cementitious materials based on solidification theory

Effects of water-binder ratio and coarse aggregate content on interior humidity, autogenous shrinkage, and drying shrinkage of concrete

Water Absorption Behaviour of Concrete: Novel Experimental Findings and Model Characterization

Effect of Supplementary Materials on the Autogenous Shrinkage of Cement Paste

Integrative Study on the Effect of Internal Curing on Autogenous and Drying Shrinkage of High-Strength Concrete

Numerical Analysis of Drying Shrinkage in Long Reinforced Concrete Structure

Experimental and numerical study on the mitigation of autogenous shrinkage of cementitious material

Experimental study and prediction model for autogenous shrinkage of recycled aggregate concrete with recycled coarse aggregate

Experimental Study on Early Drying Shrinkage of Self-compacting Barite Concrete