Abstract:Pre-soaked super-absorbent polymer (SAP) was incorporated into high-strength concrete (HSC) as an internal curing agent to study its effects on early-age shrinkage and mechanical properties. On the basis of the capillary stress based model for shrinkage prediction of concrete, together with the experimental results of cement hydration kinetics, evolution of internal temperature and humidity, development of pore structure and mechanical properties, the working mechanism of SAP was discussed. Results indicate that the addition of pre-soaked SAP significantly reduces the autogenous shrinkage as well as the early-age shrinkage of HSC under drying condition. In sealed HSC specimens, the drop of internal humidity caused by the self-desiccation effect is notably postponed by addition of pre-soaked SAP. The addition of pre-soaked SAP slightly reduces the compressive strength of HSCs and this effect is more pronounced in early-age concrete. Furthermore, an insightful comparison of the behaviours of the internal curing water introduced by the pre-soaked SAP and the additional free mixing water in concrete was made. Results indicate that the internal curing water behaves differently from the additional mixing water in influencing the cement hydration kinetics, pore structure of hardened cement pastes and the mechanical strength of concrete, due to the different spatial distribution of the two types of water in the concrete bodies. The shrinkage-reducing effect on HSC due to the addition of extra internal curing water incorporated by pre-soaked SAP is much stronger than that of the additional mixing water. Besides, the internal curing water shows much less strength-reducing effect than the additional mixing water. In virtue of the shrinkage prediction model, the working mechanism of pre-soaked SAP in reducing autogenous shrinkage of HSC is proposed on the basis of the following two aspects. The participation of internal curing water in cement hydration process leads to a total volume gain of the hardening cement pastes. Meanwhile, the release of internal curing water from the pre-soaked SAP postpones the drop of internal humidity. The synergistic effect of these two factors effectively reduces the autogenous shrinkage of HSC.

Integrative Study on the Effect of Internal Curing on Autogenous and Drying Shrinkage of High-Strength Concrete

Shrinkage of High-Strength Calcium Sulfoaluminate Cement Concrete with Impact of Pre-Soaked Lightweight Aggregate Internal Curing

Integrated Shrinkage, Relative Humidity, Strength Development, and Cracking Potential of Internally Cured Concrete Exposed to Different Drying Conditions

Combination Effects of Internal Curing and Permanent Formwork on Shrinkage of High Strength Concrete

Identification of Indexes That Could Reflect Early Drying Shrinkage of High Strength Concrete with Minerals

Effect of internal curing on internal relative humidity and shrinkage of high strength concrete slabs

Evaluation of Shrinkage Induced Cracking in Concrete with Impact of Internal Curing and Water to Cement Ratio

Influence of Pre-wetted Lightweight Aggregate on Early-age Shrinkage of High Strength Concrete

Effects of water-binder ratio and coarse aggregate content on interior humidity, autogenous shrinkage, and drying shrinkage of concrete

Internal Curing Efficiency of Prewetted LWFAs on Concrete Humidity and Autogenous Shrinkage Development

Effect of water‐to‐cement ratio on internal relative humidity and autogenous shrinkage of early‐age concrete internally cured by superabsorbent polymers

Integrative Studies on Autogenous and Drying Shrinkages of Concrete at Early-Age

Internal curing of high strength concrete based on saturated microporous cenospheres

Experimental and Theoretical Studies on Autogenous Shrinkage of Concrete at Early Ages

Calculation of Shrinkage Stress in Concrete Structures with Impact of Internal Curing

A Method for Internal Curing Water Calculation of Concrete with Super Absorbent Polymer

Influence of Early-age Curing Time on Shrinkage of Concrete

Effect of Cementitious Permanent Formwork on Moisture Field of Internal-Cured Concrete under Drying

Shrinkage-reducing effect and strength development of internally cured concrete under different curing conditions

Effect of pre-soaked superabsorbent polymer on shrinkage of high-strength concrete

Tests and Simulations of Interior Humidity and Shrinkage of Concrete under Sealed Condition