Abstract:Humidity change in concrete is the leading cause of concrete shrinkage. Moreover, the moisture diffusion coefficient of concrete is an essential parameter for assessing and predicting the internal moisture content of concrete. However, there is a lack of theoretical construction and experimental studies on the effect of different conditions, especially different constraints, on the moisture diffusion coefficient of concrete. Therefore, the internal humidity, pore structure parameters, and basic mechanical properties of concrete under different strength grades C30, C40, C50, and C60 (C stands for concrete and numbers indicate the strength class of the concrete), curing environments (dry and sealed curing conditions), and constraints were tested in this study. In addition, a calculation model of concrete's internal humidity and humidity diffusion coefficient was established. The research findings show that the internal humidity of concrete decreased with age due to hydration and drying. External humidity had a significant effect on the moisture change of concrete, and the lower the external humidity, the larger the humidity diffusion coefficient and the faster the internal humidity of concrete decreases. Reinforcement (confinement) changes the pore structure parameters of the concrete, which in turn affects the transport of moisture within the concrete. The higher the reinforcement rate, the larger the pore structure parameters of the concrete, the larger the humidity diffusion coefficient, and the faster the concrete humidity decreases. The method proposed in the study can accurately predict the internal humidity of concrete using the humidity diffusion coefficient. The research results are a reference for preventing concrete shrinkage and cracking in construction.

Tests and Simulations of Interior Humidity and Shrinkage of Concrete under Sealed Condition

Integrative Studies on Autogenous and Drying Shrinkages of Concrete at Early-Age

Shrinkage And Interior Humidity Of Concrete Under Dry-Wet Cycles

Tests and Simulations on Shrinkage of Concrete at Early-Age

Identification of Indexes That Could Reflect Early Drying Shrinkage of High Strength Concrete with Minerals

Influence of Mineral Admixtures on early Shrinkage of Ordinary Concrete

Uniform driving force for autogenous and drying shrinkage of concrete

Effects of water-binder ratio and coarse aggregate content on interior humidity, autogenous shrinkage, and drying shrinkage of concrete

Numerical Analysis of Drying Shrinkage in Long Reinforced Concrete Structure

Integrative Study on the Effect of Internal Curing on Autogenous and Drying Shrinkage of High-Strength Concrete

Experimental and Theoretical Studies on Autogenous Shrinkage of Concrete at Early Ages

Moisture Movement in Early-Age Concrete under Cement Hydration and Environmental Drying

Micromechanical Modeling on Autogenous and Drying Shrinkages of Concrete

Experimental Study on the Internal Relative Humidity in Concrete under Dry-Wet Cycles

Shrinkage Stress in Concrete under Dry–wet Cycles: an Example with Concrete Column

Moisture Diffusion Coefficient of Concrete under Different Conditions

Interior Humidity of Concrete under Dry-Wet Cycles

Calculation of Shrinkage Stress in Concrete Structures with Impact of Internal Curing

Theoretical Modeling and Verification of Concrete Moisture Diffusion Surface Factor

Integrative Modeling on Self-Desiccation and Moisture Diffusion in Concrete Based on Variation of Water Content

Influence of Shrinkage Retarder on Early Self-Shrinking of Concrete