Abstract:To solve the disadvantages of traditional phase-change heat dissipation technologies, such as instability in two-phase flow and difficulty in active temperature control, a mechanical-capillary driven hybrid phase-change loop (HPCL) is designed and tested. The experiment results show that the heating power and liquid-vapor pressure difference have a decisive influence on the transformation of heat transfer modes. With the increase of heating power while maintaining the liquid-vapor pressure difference unchanged, the baseplate of evaporator undergoes four heat transfer modes, i.e. flooded, partially flooded, thin film evaporation and overheating. Among them, thin film evaporation has the significant advantages of short start-up time and high heat transfer efficiency. Meanwhile, when the baseplate temperature is maintained below 85 ℃, the heat dissipation power is enhanced by about 6.5 times if the liquid-vapor pressure difference is increased from 0 kPa to 15 kPa. Therefore, increasing the liquid-vapor pressure difference is an active means in heat transfer enhancement. The heat transfer modes distribution diagram is drawn by taking into account of power and liquid-vapor pressure difference. Transition criterions between different heat transfer modes are given. The diagram suggests that the thin film evaporation region is in the shape of "horn". In engineering application, liquid-vapor pressure difference can be regulated adaptively according to the actual operating characteristics of heat dissipation target to achieve the optimal heat dissipation effect. Furthermore, the accurate and rapid control over baseplate temperature can be realized by controlling liquid-vapor pressure difference. In such way, the accuracy of temperature control is within ± 0.5 ℃. Therefore, controlling liquid-vapor pressure difference is a simple and effective means of active temperature control.

Phase change driving mechanism and model for Capillary Pumped Loop and Loop Heat Pipe

Phase Shift Mechanism of Pulse Tube Cooler Based on Fluid Network Theory

Simulation of Steady-State Operation of an Ejector-Assisted Loop Heat Pipe with a Flat Evaporator for Application in Electronic Cooling

Experimental study of mechanical-capillary driven phase-change loop for heat dissipation of electronic devices and batteries

Analysis of Temperature and Pressure Stability in Capillary Pumped Loops

Investigation on Heat and Mass Transfer in A Evaporator of A Capillary-Pumped Loop with the Lattice Boltzmann Method: Pore Scale Simulation

Experimental Study on an Thermosyphon Loop with Bubble Pump Effect

Design of a Novel Turbine-Pump-driven Loop Heat Pipe and Its Thermodynamic Analysis

Thermo-hydrodynamic Analysis of a Nitrogen Flat-Plate Pulsating Heat Pipe Using CFD Modeling and Visualization Experiments

Pumping mechanism of thermally driven phase transition micropump

Exploration of Dual-Phase Change Coupled Heat Transfer in Solar Regenerative Evaporator

Experimental Investigation of a Small Capillary Pumped Loop Subjected to Antigravity

Visualization study of a flat confined loop heat pipe for electronic devices cooling

Investigation of a Gas-Pump-Driven Loop Heat Pipe

Dynamic thermal response behaviors of pumped two-phase loop with latent heat storage

Experimental investigation on the thermal performance of a novel loop heat pipe (LHP) with micro-channel structure

Numerical investigation on transient and steady phase change heat transfer in the evaporator of a loop heat pipe

Simulation of a two-phase loop thermosyphon using a new interface-resolved phase change model

Experimental and Numerical Analysis of Start-Up of a Capillary Pumped Loop for Terrestrial Applications

Experimental Investigation Thermal Performance of Loop Heat Pipe Operating with Different Working Fluids

Investigation on Multi-Pump Liquid-Cooling Loop Based on Thermomagnetic Effect