Abstract:A multi-parametric transient numerical simulation of the start-up of a large diameter Pulsating Heat Pipe (PHP) specially designed for future experiments on the International Space Station (ISS) are compared to the results obtained during a parabolic flight campaign supported by the European Space Agency. Since the channel diameter is larger than the capillary limit in normal gravity, such a device behaves as a loop thermosyphon on ground and as a PHP in weightless conditions; therefore, the microgravity environment is mandatory for pulsating mode. Because of a short duration of microgravity during a parabolic flight, the data concerns only the transient start-up behavior of the device. One of the most comprehensive models in the literature, namely the in-house 1-D transient code CASCO (French acronym for Code Avanc{\'e} de Simulation du Caloduc Oscillant: Advanced PHP Simulation Code in English), has been configured in terms of geometry, topology, material properties and thermal boundary conditions to model the experimental device.The comparison between numerical and experimental results is performed simultaneously on the temporal evolution of multiple parameters: tube wall temperature, pressure and, wherever possible, velocity of liquid plugs, their length and temperature distribution within them. The simulation results agree with the experiment for different input powers. Temperatures are predicted with a maximum deviation of 7%. Pressure variation trend is qualitatively captured as well as the liquid plug velocity, length and temperature distribution. The model also shows the ability of capturing the instant when the fluid pressure begins to oscillate after the heat load is supplied, which is a fundamental information for the correct design of the engineering model that will be tested on the ISS. We also reveal the existence of strong liquid temperature gradients near the ends of liquid plugs both experimentally and by simulation. Finally, a theoretical prediction of the stable functioning of a large diameter PHP in microgravity is given. Results show that the system provided with an input power of 185W should be able to reach the steady state after 1min and maintain a stable operation from then on.

Experimental Investigation of a Small Capillary Pumped Loop Subjected to Antigravity

Experimental and Numerical Analysis of Start-Up of a Capillary Pumped Loop for Terrestrial Applications

An experimental investigation on capillary pumped loop with the meshes wick

Analysis of Temperature and Pressure Stability in Capillary Pumped Loops

Experimental and Numerical Investigation on the Dynamic Characteristics of a Lab-Scale Transcritical CO2 Loop

Experimental Study on an Thermosyphon Loop with Bubble Pump Effect

Possibility of application of capillary pumped loop in manned space cabin's thermal environment control

Experimental study on a dual compensation chamber loop heat pipe with a ceramic wick

Startup Characteristics of Pump-Assisted Capillary Phase Change Loop

Experimental study on the transient behaviors of mechanically pumped two-phase loop with a novel accumulator for thermal control of space camera payload

Experimental Study on the Transient Behaviors of Mechanically Pumped Two-Phase Loop with a Phase Change Energy Storage Device for Short Time and Large Heat Power Dissipation of Spacecraft

Experimental Study on the Heat Transfer Performance of Pump-assisted Capillary Phase-change Loop

Experimental Study on the Boiling Heat Transfer Characteristics of a Pump-Driven Two-Phase Cooling Loop System for High Heat Flux Avionics

Application of Cu-water and Cu-ethanol Nanofluids in a Small Flat Capillary Pumped Loop

Experimental study on dynamic behavior of mechanically pumped two-phase loop with a novel accumulator in simulated space environment

Study on Cooling Capacity Characteristics of an Open-Cycle Joule-Thomson Cryocooler Working at Liquid Helium Temperature

Structure Innovation and Material Optimization of Annular Linear Induction Electromagnetic Pump Based on Temperature Field Constraints

Experimental investigation on startup of a novel two-phase cooling loop

Theoretical and experimental investigation of the startup characteristics of cryogenic loop heat pipes

Visual Investigation on Startup Characteristics of a Novel Loop Heat Pipe

Experimental analysis and transient numerical simulation of a large diameter pulsating heat pipe in microgravity conditions