Abstract:On the basis of previous experimental studies of two-phase flow condensation heat transfer for R134a inside the horizontal micro-fin tubes, a theoretically analysis of heat transfer characteristic combining both heat transfer mechanism and flow mechanism is discussed by the experimental data of heat transfer coefficient and pressure drop, to further clarify the influence of experimental condition and tube structure on heat transfer characteristics under the special working condition. Two performance factors, enhancement factor (EF) and penalty factor (PF), are introduced to quantitatively compare the effect of micro-fin on the heat transfer coefficient and the pressure drop between enhance tube and smooth tube. Meanwhile, the comprehensive factor, CHF, is applied to evaluate the comprehensive performance of heat transfer tube. It was found that enhancement factor (EF) and penalty factor (PF) both increase with increasing mass flux and fin helical angle, and decreasing saturation temperature, the comprehensive factor, CHF, is always greater than one and increases with increasing fin helical angle and mass flux, and decreasing saturation temperature. Moreover, based on the comparative analysis findings that some existing correlations of heat transfer characteristics underestimate most of the experimental data, and the experimental variable has great influences on the correlation prediction accuracy, such as mass flux, which is proportionate to the prediction deviation of correlation. Therefore, a new correlation was developed through analyzing quantitatively influencing mechanism of the experimental variable on the heat transfer characteristics, in a way that a two-phase frictional multiplier is defined firstly from the experimental data and then the forced convection heat transfer mechanism is redefined based on the comprehensive effect of various experimental variables. By the experimental data verification, the new correlation shows good prediction effect with the mean deviation of less than 5%.

Phase Shift Mechanism of Pulse Tube Cooler Based on Fluid Network Theory

Generation Mechanism of DC Flow in Double-Inlet Pulse Tube Coolers

EXPERIMENTAL RESEARCH OF THERMAL-COUPLED VERSION HIGH FREQUENCY TWO-STAGE PULSE TUBE COOLER

DC Flow and Its Suppression in Pulse Tube Cooler

A Study on the Interstage Cooling Capacity Shifting of Stirling/pulse Tube Hybrid Cooler Based on an Idealized Model

Computational Fluid Dynamic Simulation of an Inter-Phasing Pulse Tube Cooler

Experimental study on a three-stage cascade pulse tube cryocooler with transmission tube

Theoretical and Experimental Study for the Transient Behavior of a Linear Compressor During Pulse Tube Cryocooler Cool Down Process

A Pulse Tube Cryocooler with A Cold Reservoir

An Experimental Investigation on Pulse Tube Refrigeration with Mixture Fluids

An optimization method of inertance tube in Stirling type pulse tube cooler

Analysis of Pulse Tube Cooler with Cold-End Reservoir

Study on a Cascade Pulse Tube Cooler with Work Recovery

The thermodynamic characteristics of a Stirling/pulse tube hybrid cryocooler

Influence of Hot End Heat Exchangers on Cascading Three Pulse Tube Coolers

Study on the Flow Nonuniformity in a High Capacity Stirling Pulse Tube Cryocooler

Complete linear model for double-inlet pulse tube cooler

CFD study of a simple orifice pulse tube cooler

Theoretical and Experimental Analyses of Two-Phase Flow Condensation Heat Transfer Inside the Horizontal Micro-Fin Tube

A new stepped-channel liquid cooling plate thermal management system combined with composite phase change materials

Theoretical and Experimental Study on a Pulse Tube Cryocooler Driven with a Linear Compressor