Abstract:The working condition of the linear compressor greatly affects the performance of the cryocooler. When the cryocooler operates during a transient working state like the cool down process, the linear compressor is also in a transient working state and could lead to deviation from designed steady state condition. In order to study the transient behavior of a linear compressor during the cool down process, a theoretical model based on the finite difference method is proposed. The temperature distribution of the regenerator during the cool down process is calculated. The variation of the impedance of the cold finger is then calculated. The transient behavior of the linear compressor are studied according to the impedance match between the compressor and the cold finger. The theoretical model shows that the transient behavior of the linear compressor is determined by the variation of the cold finger impedance during the cool down process and the increase of the input power could be larger than 40% with constant input voltage through the whole cool down process. A Sage simulation model of the cryocooler is built and the cool down experiments are carried out. The simulation and the experiment results are consistent with the theoretical model. It's also shown that the theoretical model could provide better prediction of the transient behavior of the linear compressor. The study of the transient behavior of the linear compressor could help improve the design and control of the linear compressor especially for the transient process.

DC Flow and Its Suppression in Pulse Tube Cooler

Generation Mechanism of DC Flow in Double-Inlet Pulse Tube Coolers

DC FLOW SUPPRESSION IN A SINGLE-STAGE G-M TYPE PULSE TUBE COOLER

Experimental investigation on DC flow suppression and refrigeration characteristics of a high-performance single-stage GM-type

Experimental Investigation On Dc Flow Control In A Single-Stage Pulse Tube Refrigerator Operating Below 20k

Investigation on High-Performance Single-Stage GM-Type Pulse Tube Cooler

CFD analysis of nonlinear processes in pulse tube refrigerators: Streaming induced by vortices

Phase Shift Mechanism of Pulse Tube Cooler Based on Fluid Network Theory

Effects of DC Flow on Pulse Tube Cryocooler Working at Liquid Hydrogen and Liquid Nitrogen Temperatures

Advances in high frequency pulse tube cryocooler research(PartⅠ)

Thermoacoustically Driven Pulse Tube Cooler below 60K

Study on a Cascade Pulse Tube Cooler with Work Recovery

Experimental discovery and verification of the third type of DC gas flow in pulse tube cryocooler

Influence of Hot End Heat Exchangers on Cascading Three Pulse Tube Coolers

Study on the Flow Nonuniformity in a High Capacity Stirling Pulse Tube Cryocooler

Effect of Cooling Water Flow Path on the Flow and Heat Transfer in a 660 MW Power Plant Condenser

Computational Fluid Dynamic Simulation of an Inter-Phasing Pulse Tube Cooler

Influence of DC flow on the performance of a bypass-typed heat-driven thermoacoustic refrigerator

Study on a single-stage pulse tube with two-valve double-inlet configuration

Experimental study on a three-stage cascade pulse tube cryocooler with transmission tube

Theoretical and Experimental Study for the Transient Behavior of a Linear Compressor During Pulse Tube Cryocooler Cool Down Process