Abstract:The two-phase thermosyphon loop (TPTL), which has an excellent heat transfer performance with simple, compact structure and pump-free advantages, can effectively solve the heat transfer problem under high heat flux. It is necessary to optimize the TPTL to operate in good conditions, especially the state of the downcomer in which the liquid head is one of the critical parameters to determine the driving force of the circulation. However, in the existing studies, the flow features under high filling ratio and high heat flux were ignored in the downcomer. Since a high filling ratio has been proved to have good performance at high heat flux. Herein, the flow characteristics of the TPTL downcomer were seen and quantified using an experimental visual setup under different filling ratios in this study. Two flow features under high heat flux, for the first time, are reported: 1. two-phase flow in the downcomer at high filling ratios. 2. liquid column height oscillation under a partially liquid-filled state. According to the results, the filling ratio significantly impacts the flow characteristics of the downcomer. The TPTL downcomer state, contrary to the traditional understanding, can be partially filled with liquid but not totally filled with fluid all the time, implying that the driving force may be less than the typical assumption. TPTL with a high filling ratio can also provide a maximum gravity pressure head driving force due to the full downcomer. In addition, the bubble pump, which influences by the heat flux, also accelerates the mass flow in the TPTL. Consequently, TPTLs with a high filling ratio showed a significant thermal performance. A partially filled with the liquid phenomenon is demonstrated in moderate filling ratios, and the height of the liquid column will change as the heat flux increases, which indicates the self-regulation of TPTL. When the filling ratio is low, the liquid column height is greatly influenced by the filling ratio. The high liquid column will also give the TPTL excellent thermal performance. The ideal state of a TPTL downcomer is the downcomer filled with two-phase liquid under a high void fraction, which is realized by a high filling ratio TPTL. This paper sheds some light on the downcomer state of TPTLs to optimize the TPTL thermal performance.

Dynamic thermal response behaviors of pumped two-phase loop with latent heat storage

Numerical Investigation of Heat Transfer Characteristics in a Shell- And-Tube Latent Heat Thermal Energy Storage System

Effects of Fluctuating Thermal Sources on a Shell-and-tube Latent Thermal Energy Storage During Charging Process

Applications and Technological Challenges for Heat Recovery, Storage and Utilisation with Latent Thermal Energy Storage

Performance Evaluation and Analysis of a Vertical Heat Pipe Latent Thermal Energy Storage System with Fins-Copper Foam Combination

Performance Investigation on an Air Source Heat Pump System with Latent Heat Thermal Energy Storage

Optimal design and thermal performance study of a two-stage latent heat thermal energy storage technology for heating systems

Experimental Study on the Dynamic Heat Transfer Characteristics of a Mechanically Pumped Two-phase Cooling Loop

Experimental study on dynamic behavior of mechanically pumped two-phase loop with a novel accumulator in simulated space environment

On the performance of a latent heat thermal storage unit integrated with a helically coiled copper tube and organic phase change materials: A lab-scale experimental study

Thermal characteristics of a two-phase loop thermosyphon with micro-grooved structures inside the evaporator

Experimental Study on the Transient Behaviors of Mechanically Pumped Two-Phase Loop with a Phase Change Energy Storage Device for Short Time and Large Heat Power Dissipation of Spacecraft

Investigation of the thermal response characteristics of the loop thermosyphon under convective boundary conditions

Experimental study on the transient behaviors of mechanically pumped two-phase loop with a novel accumulator for thermal control of space camera payload

Experimental and theoretical analysis of a closed loop two-phase thermosiphon under various states for latent heat storage

Role of latent heat storage in thermal performance of an axially grooved heat pipe

Latent heat thermal energy storage: Theory and practice in performance enhancement based on heat pipes

Experimentally Comparative Study on Two-Phase Natural and Pump-Driven Loop Used in HVAC Systems

Thermal performance analysis and optimization of cascaded packed bed latent heat storage tank

Numerical Simulation of Thermal Performance and Thermal Stress of Latent Heat Storage System with Various Fins

Visualized-experimental assessment on a two-phase thermosyphon loop downcomer state with wide range of filling ratios