Abstract:Cadmium zinc telluride (CdZnTe, CZT) radiation detectors are suitable for a variety of applications, due to their high spatial resolution and spectroscopic energy performance at room temperature. However, state-of-the-art detector systems require high-performance readout electronics. Though an application-specific integrated circuit (ASIC) is an adequate solution for the readout, requirements of high dynamic range and high throughput are not available in any commercial circuit. Consequently, the present study develops the analog front-end electronics with operational amplifiers for an 8x8 pixelated CZT detector. For this purpose, we modeled an electrical equivalent circuit of the CZT detector with the associated charge-sensitive amplifier (CSA). Based on a detailed network analysis, the circuit design is completed by numerical values for various features such as ballistic deficit, charge-to-voltage gain, rise time, and noise level. A verification of the performance is carried out by synthetic detector signals and a pixel detector. The experimental results with the pixel detector assembly and a 22Na radioactive source emphasize the depth dependence of the measured energy. After pulse processing with depth correction based on the fit of the weighting potential, the energy resolution is 2.2% (FWHM) for the 511 keV photopeak.

Low Noise Charge Sensitive Preamplifier A250 for CZT Detector Readout

Low Noise CMOS Front-End Amplifier Used in Detection of Extracellular Neural Signals (ENG)

Design of A Low Noise Readout Asic for Cdznte Detector

Development Of A Low Noise Readout Asic For Czt Detectors For Gamma-Ray Spectroscopy Applications

Low Noise Front-end Electronics for a CZT-based Gamma-ray Spectrometer

A Low Noise Readout Asic for Cdte/Cdznte Detectors

Design and test results of a low-noise readout ASIC for pixelated CdZnTe detectors

Low-noise CMOS Charge-Sensitive Preamplifier

Signal Processing Of A Strengthened Electric Field Line Anode Cdznte Detector

A Low Noise Charge Sensitive Front-end Readout Circuit

Charge-sensitive front-end electronics with operational amplifiers for CdZnTe detectors

Particle Detector Readout Integrated Circuit of 0.18 Mu M Technology with 164 E Equivalent Noise Charge

Detection of CdZnTe Detectors to Low Energy Photos

Design and Test Results of A Low-Noise Readout Integrated Circuit for High-Energy Particle Detectors

Particle Detector Readout Integrated Circuit of 0.18μm Technology with 164 E Equivalent Noise Charge

A Low Noise Fully-Integrated Readout Electronic with Pile-Up Rejector for Particle Detector.

A Low-Noise Charge-Sensitive Amplifier for Gainless Charge Readout in High-Pressure Gas TPC

An Ultra-Low Noise Cryogenic CMOS Charge Sensitive Preamplifier for Large Volume Point-Contact HPGe Detectors

Development Of A Multi-Energy Photon-Counting Readout Asic For Czt Detectors

Leakage Currents and Capacitances of Thick CZT Detectors

A Novel Czt Detector Using Strengthened Electric Field Line Anode