Abstract:We demonstrate the use of aqueous-based layer-by-layer (LbL) processing and in situ nanoreactor chemistry for creating polyelectrolyte multilayer (PEM) nanocomposites in which the concentration of a nanoparticle species is modulated throughout the depth of the film in a complex way. Using the in situ growth of silver nanoparticles to selectively increase the refractive index of precisely defined regions of the PEM film, we have produced a digitized rugate filter, a special type of dielectric mirror possessing many thin layers that approximate a continuous, periodic refractive index profile. The design of the digital rugate from an initial smooth index profile was aided by a computer, and construction of the device was accomplished entirely by automated means. Poly(allylamine hydrochloride) (PAH) and poly(acrylic acid) (PAA) bilayer regions within the film supported subsequent nanoreactor chemistry and created the high refractive index regions of the film, while PAH and poly(styrenesulfonate) (PSS) bilayer regions remained unmodified and served as the low index regions. Spectroscopic results obtained from the assembled device confirm the presence of a reflection band that grows in amplitude with increasing silver incorporation, reaching a peak reflectance of 75% after five silver loading and exchange cycles. The rugate structure suppresses reflection sidebands, features common to Bragg reflectors and simpler dielectric mirror designs. Cross-sectional TEM reveals nanoscale control of the size and location of silver-containing domains within the PEM film. The ability of this method to control the placement of nanoparticles within PEMs enables the inexpensive, easy production of conformable optical coatings with tunable properties. In addition, these nanocomposite films may have applications in a number of other fields where precise control of effective gradients in physical properties throughout thin films has been shown to affect the overall performance in a desirable way.

Graded Index 532hr/1064ht Filter by Glancing Angle Deposition

Precise broad-band anti-refection coating fabricated by atomic layer deposition

Rugate Notch Filter Fabricated by Atomic Layer Deposition.

Anti-reflection Coating at 550 Nm Fabricated by Atomic Layer Deposition

Wide-angle Broadband Antireflection Coatings with Nano-Taper Hydrated Alumina Film.

Optical Properties Study of Silicon Oxynitride Films Deposited by RF Magnetron Sputtering

Atomic Layer Deposition of Al2O3 and TiO2 Multilayers for Application As Broadband Antireflection Coating

Focusing of liquid surface waves by gradient index lens

Refractive Index Analysis of Graded Index Coatings Prepared by Glancing Angle Deposition

Standing Wave Field Distribution In Graded-Index Antireflection Coatings

Refractive Indexes of Oxidized Thin Films Deposited by Ion Beam Sputtering

Preparation of Gradient Refractive Index Films on Glass Surface and Its Anti-Reflection Properties

Mechanical Properties Of Zirconia Thin Films Deposited By Filtered Cathodic Vacuum Arc

Broadband antireflection film by glancing angle deposition

Study of Gradient Thin Film Material Produced by PECVD

Creating effective refractive index gradients within polyelectrolyte multilayer films: molecularly assembled rugate filters

Simulation, Fabrication and Characterization of a Tunable Bragg Reflector Based on Silicon Oxide and Silicon Nitride Dielectric Films Deposited by PECVD

A Method of Improving the Structural Color Quality of HfO2 Grating Based on Thin Film Filter

Design and preparation of high-transmittance broadband antireflection coatings with tailored refractive indices deposited by PECVD

Imprinting Gradient Refractive Index Micro-Structure in GeS2–Ga2S3–KCl Glass for Broadband Diffraction Grating

High-Efficiency Multilayer-Coated Ion-Beam-Etched Blazed Grating in the Extreme-Ultraviolet Wavelength Region