Abstract:The hot compression behavior of as-extruded Mg-0.6Mn-0.5Al-0.5Zn-0.4Ca alloy was studied on a Gleeble-3500 thermal simulation machine. Experiments were conducted at temperatures ranging from 523 to 673 K and strain rates ranging from 0.001 to 1 s −1 . Results showed that an increase in the strain rate or a decrease in deformation temperature led to an increase in true stress. The constitutive equation and processing maps of the alloy were obtained and analyzed. The influence of deformation temperatures and strain rates on microstructural evolution and texture was studied with the assistance of electron backscatter diffraction (EBSD). The as-extruded alloy exhibited a bimodal structure that consisted of deformed coarse grains and fine equiaxed recrystallized structures (approximately 1.57 μm). The EBSD results of deformed alloy samples revealed that the recrystallization degree and average grain size increased as the deformation temperature increased. By contrast, dislocation density and texture intensity decreased. Compressive texture weakened with the increase in the deformation temperature at the strain rate of 0.01 s −1 . Most grains with {0001} planes tilted away from the compression direction (CD) gradually. In addition, when the strain rate decreased, the recrystallization degree and average grain size increased. Meanwhile, the dislocation density decreased. Texture appeared to be insensitive to the strain rate. These findings provide valuable insights into the hot compression behavior, microstructural evolution, and texture changes in the Mg-0.6Mn-0.5Al-0.5Zn-0.4Ca alloy, contributing to the understanding of its processing-microstructure-property relationships.

Annealing Behavior of the Compressed AZ31 Magnesium Alloy with Different Strain

Preferential grain growth and textural evolution of AZ31B Mg alloy during annealing after isothermal compression at 400 °C

High Temperature Deformation Behavior of Fine-Grained AZ31 Magnesium Alloy

Deformation behavior and microstructure transformation of AZ31B Mg alloy under high strain rate compression

Effect of annealing treatment on the microstructure and mechanical properties of bulk nanostructured Ti/AZ61 composites prepared by hot pressing

Temperature Dependency on the Microscopic Mechanism in the Normal Direction of Wrought AZ31 Sheet under Dynamic Compressive Behavior

Deformation behavior and microstructure evolution of AZ31 Mg alloy during gradient thermal compression

Effect of crystal orientation on the deformation behavior of the magnesium alloy AZ31 during plane strain compression

Evolution of Microstructure and Texture During Uniaxial Compression of Cast AZ31Mg Alloy at Elevated Temperatures

Hot Deformation Behavior and Microstructural Evolution of Twin-Roll-Casting Mg Alloy during High-Temperature Compression

Microstructure in as-cast AZ61 magnesium alloy during hot compression deformation

Asymmetry in the hot deformation behavior of AZ31B magnesium sheets

Research on deformation mechanism of AZ31 magnesium alloy during uniaxial compression

Microstructure of semi-solid AZ91D magnesium alloy after hot compression

Microstructural Evolution of Az61 Magnesium Alloy During Hot Deformation

Deformation Behavior of AZ31B Magnesium Alloys with Different Process States under Thermal Compression

Microstructure Evolution of AZ31B Magnesium Alloy Sheets Deformed in Different Deformation Directions

Dynamic Recrystallization of AZ91 Magnesium Alloy During Compression Deformation at Elevated Temperature

Microstructure Evolution of AZ91D Magnesium Alloy During High Temperature Compression

Exceptional improvement in the yield strength of AZ61 magnesium alloy via cryo-stretching and its implications on the grain growth during annealing

Hot deformation behavior of novel high-strength Mg-0.6Mn-0.5Al-0.5Zn-0.4Ca alloy