Abstract:The (1 − x)(Li 0.03 Na 0.5 K 0.47 )(Nb 0.92 Sb 0.05 Ta 0.03 )O 3 –xBa 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (LNKNST–BCZT, x = 0, 0.5, 1.5, 2.5, and 3.5%) lead-free piezoceramics were synthesized by the conventional solid-state reaction method with adding nano-sized Ba 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (BCZT) powder to investigate their influences on crystal structure and electrical properties. The X-ray diffraction (XRD) analysis reveals that all the sintered LNKNST–BCZT ceramics exhibit pure perovskite structure with the mainly rhombohedral (R) phase or the coexistence of rhombohedral (R) phase and tetragonal (T) phase. The composition of the LNKNST–1.5%BCZT ceramics locates around the critical point, i.e., the ceramics changing from the coexistence of rhombohedral (R) phase and tetragonal (T) phase to purely rhombohedral (R) phase, and presents the most densified microstructure morphology, which can be confirmed further by the field emission scanning electron microscope (FESEM) observation. There are two dielectric anomalies in the temperature dependent dielectric properties curves of the LNKNST–BCZT ceramics, which correlate with the ferroelectric rhombohedral (R) phase changing to the ferroelectric tetragonal (T) phase, and then to the paraelectric cubic (C) phase. Both the Curie–Weiss law and the power law fittings confirm the diffuse phase transition ferroelectrics characteristic of the LNKNST–1.5%BCZT ceramics, which is considered as correlating with the polar nanoregions (PNRs). Due to the densification effect caused by the chosen amount of nano-sized BCZT doping and the construction of R–T polymorphic phase boundary, the LNKNST–1.5%BCZT ceramics exhibit the best ferroelectric and piezoelectric properties. The complex impedance spectroscopy analysis confirms that the extrinsic electrical conduction mechanism at high temperatures is dominated by the oxygen vacancies induced by the evaporation of the alkali metals during sintering.

Lead Free Bnt Ceramics As Driving Element in Traveling Wave Type Ultrasonic Motor

Research and application on piezoelectric ceramic component with shear modes for micro-ultrasonic motor

Ring-Type Rotary Ultrasonic Motor Using Lead-free Ceramics

Facile Preparation and Performance of Novel High-Tc Xbi(ni1/2ti1/2)o3-(1-x)pb(zr1/2ti1/2)o3 Piezoceramics

Cylinder-Shaped Ultrasonic Motors 4.8 Mm in Diameter Using Electroactive Piezoelectric Materials

Standing Wave-Type Bi-Directional Linear Moving Ultrasonic Motor Using Plates and Weak Links

Analysis of Lead-Free Piezoceramic-Based Power Ultrasonic Transducers for Wire Bonding

Effects of nano-sized BCZT on structure and electrical properties of KNN-based lead-free piezoceramics

Enhancing Electrical Properties of High-Curie Temperature Piezoelectric Ceramics BNT-PZT and Their Mechanism

A ring-shaped linear ultrasonic motor based on PSN-PMS-PZT ceramic

A Radial-Torsional Vibration Hybrid Type Ultrasonic Motor

Study of a New Type Linear Ultrasonic Motor with Double-Driving Feet

Three-degree-of-freedom ultrasonic motor using a 5-mm-diameter piezoelectric ceramic tube.

Application Research of Piezoelectric Ceramic Components with Shear Modes in Ultrasonic Motors

Nb and Mn Co-Modified Na0.5Bi4.5Ti4O15 Bismuth-Layered Ceramics for High-Frequency Transducer Applications

Fabrication and Characterization of Lead-Free BNT-6BT Ultrasonic Transducers Designed by an Intelligent Optimization Algorithm

Design and Experiment of Annular Piezoelectric Ultrasonic Motor with Multi-Frequency Driving

Lead-Free Piezoelectric Ultrasonic Transducer and Its Application in Car Reversing Aid System

Application of the ultrasonic motor

Resonant Modes of Piezoelectric Disc Structure and Their Application in Micro Ultrasonic Motors

Process and Analysis of Multilayer Piezoelectric Ceramic for Micro-motor