A linear ultrasonic motor with a hollowed and symmetrical stator
Jing Li,Fang Che,Jie Deng,Weishan Chen,Junkao Liu,Yingxiang Liu
DOI: https://doi.org/10.1016/j.ijmecsci.2023.108718
IF: 7.3
2023-09-13
International Journal of Mechanical Sciences
Abstract:A linear standing-wave ultrasonic motor with a hollowed and symmetrical stator is proposed in this study. The stator is cut from a cuboid block to produce a hollow and symmetrical structure, in which four thin-walled beams are formed on each end of the stator. Four driving feet are circumferentially installed at each end of the stator to guide the movement of the mover, and this design can simplify the guide rail and preload mechanism, which is beneficial to realize further miniaturization. Besides, the bi-directional motions are separately achieved by only using one sine signal to excite the same order vibration of the two groups of the thin-walled beams, which is conducive to the characteristic consistency of the bi-directional motions. Then, the finite element method is used to determine the parameters of the motor, the prototype is fabricated, and the output characteristics are tested. The experimental results show that the maximum no-load velocity, resolution, and maximum carrying load of the prototype in the forward motion were 30.86 mm/s, 0.5 μm and 39 mN, respectively; while that in the backward motion were 32.31 mm/s, 0.7 μm and 33 mN, respectively. This work sheds a new light on the design of the linear bi-directional standing-wave ultrasonic motors, simplifying the guide rail and preload mechanism and utilizing only one signal and the same order vibration to realize the bi-directional motions.
engineering, mechanical,mechanics