Abstract:Commonly, the shear piezoelectric constant value for d15 is almost two times higher than those for d33 and d31. Also the value of share electro-mechanical coupling coefficient k15 is higher than those of k31 and k33. Sometimes a design for ultrasonic motor based on share coefficients d15 has the potential for superior performance. In the paper, we propose a new mechanism for exciting shear-bending vibration in piezoelectric ceramic rod. A solid piezoelectric ceramic rod is polarized along its axial direction. The surface of the cylindrical rod used as an electrode is plated with nickel. The cylindrical electrode was divided into four pairs and each pair has two parts symmetrically along the axes. If opposite voltage signals are applied to the electrode parts which are opposite on circumferential direction or along the axial direction, a shearing strain should be induced on the piezoelectric ceramic. Using a pair of alternating voltage signals (sine and cosine) on four pairs of electrodes, a shaking head vibration (wobbling motion) was generated circumferentially. A mini-ultrasonic motor prototype with this concept and a diameter of 6mm was designed. And its characteristics were determined experimentally. The design concept presented in this paper is much promising for applications in small motors, especially in those with piezoelectric ceramic rod stators with a large diameter-length ratio.

Resonant Modes of Piezoelectric Disc Structure and Their Application in Micro Ultrasonic Motors

A Disk–pivot Structure Micro Piezoelectric Actuator Using Vibration Mode B11

Research and application on piezoelectric ceramic component with shear modes for micro-ultrasonic motor

A MINIATURE HIGH-SPEED PIEZOELECTIRC MOTOR WITH A DISK-PIVOT STRUCTURE

A Micro Piezoelectric Motor with a Disk-Pivot Structure

A miniature disk-pivot piezoelectric motor with double rotors

A Novel Piezoelectric Micro-Motor Using Multilayer Co-Firing Piezoelectric Ceramics

Standing Wave-Type Bi-Directional Linear Moving Ultrasonic Motor Using Plates and Weak Links

A Miniature Piezoelectric Ultrasonic Motor Based on Circular Bending Vibration Mode

Application Research of Piezoelectric Ceramic Components with Shear Modes in Ultrasonic Motors

Application of Piezoelectric Materials in a Novel Linear Ultrasonic Motor Based on Shear-Induced Vibration Mode

A bio-inspired piezoelectric motor with simple structured asymmetric stator

Design and Property of a Square Cylinder Type Piezoelectric Ultrasonic Micromotor

Development of a resonant screw-driven piezoelectric motor operating in single-mode vibration

A Novel In-Plane Mode Rotary Ultrasonic Motor

Piezoelectric Ceramic Vibration Modes and Potential Applications

Design of a Piezoelectric Motor Driven by Sawtooth Wave and Analysis of the Performance

An L-shaped Ultrasonic Linear Piezoelectric Motor with Two Second-Order Bending Coupling Modes

The design and test of a new kind of piezoelectric motor based on standing wave and multilayer

Vibration Analysis of Stepping Piezoelectric Micro-Motor Using Wiggle Mode

Design and Experiment of Annular Piezoelectric Ultrasonic Motor with Multi-Frequency Driving