Research and application on piezoelectric ceramic component with shear modes for micro-ultrasonic motor

Cun-Yue LU,Ji-Feng GUO,Tie-Ying ZHOU

DOI: https://doi.org/10.1142/9789812770165_0019

2007-01-01

Abstract:Commonly, the shear piezoelectric constant value for d15 is almost two times higher than those for d33 and d31. Also the value of share electro-mechanical coupling coefficient k15 is higher than those of k31 and k33. Sometimes a design for ultrasonic motor based on share coefficients d15 has the potential for superior performance. In the paper, we propose a new mechanism for exciting shear-bending vibration in piezoelectric ceramic rod. A solid piezoelectric ceramic rod is polarized along its axial direction. The surface of the cylindrical rod used as an electrode is plated with nickel. The cylindrical electrode was divided into four pairs and each pair has two parts symmetrically along the axes. If opposite voltage signals are applied to the electrode parts which are opposite on circumferential direction or along the axial direction, a shearing strain should be induced on the piezoelectric ceramic. Using a pair of alternating voltage signals (sine and cosine) on four pairs of electrodes, a shaking head vibration (wobbling motion) was generated circumferentially. A mini-ultrasonic motor prototype with this concept and a diameter of 6mm was designed. And its characteristics were determined experimentally. The design concept presented in this paper is much promising for applications in small motors, especially in those with piezoelectric ceramic rod stators with a large diameter-length ratio.