Abstract:The integrated gate commutated thyristor (IGCT) is promising in dc grids nowadays. However, to meet the increasing demands for handling high fault currents, the turn-off capability of IGCT still needs to be optimized, which is affected by transient turn-off current redistribution significantly. This article proposes an experiment method based on an isolated anode design for detecting the turn-off current redistribution characteristics of IGCT. Influences of ON-state current density and commutation impedance distribution on IGCT's turn-off current redistribution characteristics are explored in detail. The results show that when IGCT's turn-off process satisfies the "hard" gate drive condition, the anode current redistribution gets changed mainly in the current commutation period and the anode voltage rising period of the turn-off process, before IGCT's dynamic avalanche phenomenon happens. Though the anode current distribution experiences large fluctuations during the commutation period, it will achieve a new balancing state at the end of this period, which almost does not affect the following periods. When IGCT goes into the anode voltage rising period, the ON-state current density distribution will affect the turn-off current redistribution. Under the effects of carrier extraction speed differences, the current density distribution throughout the chip tends to reduce its initial difference, which leads to the phenomenon of "current self-balancing." Meanwhile, the region with the highest ON-state current density dominates the anode voltage's building-up speed. To increase IGCT's turn-off capability, improving the ON-state anode current density uniformity utilizing an optimized layout or cell structure is one of the effective methods.

Research on the Turn-off Characteristic of IGCT Influenced by the Stray Inductance in High Power Inverters

Experimental Investigation on the Turn-Off Failure Mechanism of IGCT

Experimental Investigation on the Turn-Off Current Redistribution Characteristics of IGCT Based on an Isolated Anode Design

Enhancing Turn-off Performance in IGCT-Based High Power Applications—Part Ⅱ: Hybrid Switch with IGBT Integration and Experimental Validation

Experimental Evaluation of IGCT Converters with Reduced Di/dt Limiting Inductance

Enhancing Turn-off Performance in IGCT-Based High Power Applications—Part I: Anomalous High Current Turn-Off Mode and Safe Operating Area Expansion at Ultra-Low Voltage

Full-Time Junction Temperature Extraction of IGCT Based on Electrothermal Model and TSEP Method for High-Power Applications

Stray Impedance Measurement and Improvement of High-Power IGCT Gate Driver Units

Snubberless Switching-Off Characteristics of Igcts Equipped in High Power Three-Level Neutral Point Clamped Converters

Design,simulation and Analysis of IGCT-based High Power NPC Inverter

Characteristics Analysis and Loss Optimization of the Turn-on Clamp Circuit for IGCT Based DC Transformer

Optimization Design of High-Voltage-Balancing Circuit Based on the Functional Model of IGCT

Analysis on the Commutation Loop Inductance of Different Cathode Regions in GCT Wafer

Performance Evaluation of Switch Devices Equipped in High-Power Three-Level Inverters

Research on Series and Parallel Characteristics of Intergrated Gate Commutated Thyristors

A Novel Detachable Gate Driver Unit with Ultralow Inductance for Integrated Gate Commutated Thyristor

Optimal Design of Reverse Blocking IGCT for Hybrid Line Commutated Converter

Dynamic Equivalent Circuit Design in Three-level High Voltage Inverters Based On Functional Model of IGCT

High power electronics device IGCTs in high voltage inverter

Electro-Thermo-Mechanical Analysis and Modeling of High-Power Intergrated Gate Commutated Thyristors

IGCT AND IEGT--NEW HIGH POWER SILICON SWITCHES SUITABLE FOR STATCOM