Abstract:This article proposes a digital control structure for a doubly decoupled gyroscope working in the Lissajous frequency-modulated (LFM) mode based on digital phase-locked loops (PLLs), which demodulates the angular rate signal directly from the readable digital gyroscope resonance frequency, eliminating the need for specific frequency readout circuits. The resonance frequencies of the LFM gyroscope working modes contain a mode mismatch frequency modulated by input angular rate, respectively, which are tracked by two digital PLLs followed by subsequent digital demodulation and filtering. A linearized model of the digital PLL is built to analyze noise and control characteristics for different PI parameters. The impact of different amplitude–phase extraction architectures on the extracted phase signal is also addressed in this article. Contrast experiments are carried out using the same gyroscope with large internal thermal stress due to the silicon-glass bonding process and no stress relief structure around the sensing element, working in the traditional amplitude-modulated (AM) mode and the LFM mode. Overall, the LFM working mode maintains its low-temperature sensitivity and high stability in spite of the large internal thermal stress in the gyroscope compared to AM working modes. The maximum scale factor variation over the temperature range from 10 °C to 50 °C is 1000 ppm for the LFM mode compared to 51 900 ppm for the AM closed mode. The maximum zero rate output drift over the same temperature range is 0.1248 °/s for the LFM mode and 10.7139 °/s for the AM closed mode. The scale factor nonlinearity is 329 ppm with an angular rate input range of ±50 °/s for the LFM mode compared to 1902 ppm for the AM closed mode. The LFM mode zero-bias fluctuation for ten days is less than 0.12 °/s. The angle random walk (ARW) and the bias instability (BI) of the LFM gyroscope are 0.316 °/ $\surd \text{h}$ and 2 °/h, respectively.

Capacitance Sensing and Software-Realized Lock-in Amplifier for the Electromagnetically Levitated Micro Gyroscope

The Signal Detection for the Levitated Rotor Micro Gyroscope

A Robust Triangular-Electrode Based Capacitive Detection Method For Mems Gyroscopes

An Improved Phase-Robust Configuration for Vibration Amplitude-Phase Extraction for Capacitive MEMS Gyroscopes

A Novel Triangular-Electrode Based Capacitive Sensing Method for MEMS Resonant Devices

Linear Parametric Amplification /attenuation Without Spring Hardening /softening Effect in MEMS Gyroscopes

Magnetically levitated micro gyroscope and its software realized demodulation circuit

Linear Parametric Amplification/attenuation for MEMS Vibratory Gyroscopes Based on Triangular Area-Varying Capacitors

A Digital Control Structure for Lissajous Frequency-Modulated Mode MEMS Gyroscope

A Novel Amplitude-Phase Information Extraction Architecture for MEMS Vibratory Gyroscopes Using a Modified Double Side-Band Demodulation Configuration

Design of Capacitance Structure of Micro Gyroscope with Electromagnetically Levitated Rotor

The design and implementation of interface electronics for silicon micromechanical gyroscopes

A Signal Detecting Method for the Double Capacitive Output Micromachined Gyroscope

A Capacitive Readout Circuit with DC Sensing Method for Micromachined Gyroscopes

Design of digital capacitive micro-displacement sensing channel for micromachined electrostatically suspended gyroscope

A Low-noise High-voltage Interface Circuit for Capacitive MEMS Gyroscope.

The Micro-displacement Detecting System Design of a Micromachined Electrostatically Suspended Gyroscope

A Prototype of MEMS Gyroscope Based on Digital Control

High-performance capacitive readout circuit for MEMS gyroscope

Design of a Micro-Electro Mechanical System Quad Mass Gyroscope with Compliant Mechanical Amplification

Differential Capacitance Detection Circuit Design Based on the Sigma-Delta Technology