Abstract:Porous silicon (PSi) has developed for many applications such as gas and humidity sensors. Various methods are available to fabricate PSi, and electrochemical anodization is common due to low cost and easy use. Current density, etching/anodization time, type of etching solution, and electrode distance are the parameters determining resulting pores. The substrate used n-type silicon wafer with (111)-orientation and resistivity of 1.5-4.5 Ω.cm with a size of 1.5×1 cm 2 . The cleaning process of the samples employed the RCA cleaning procedure. Conductive contacts required for the electrochemical anodization were aluminum on the samples. The electrodes were the Si sample acting as anode and platinum (Pt) electrode as a cathode. The etching solution using a mixture of HF (40%) and ethanol (99%) with a 1:1 ratio. The electrode distance was 1.5, 2.0, and 2.5 cm. The current density for each electrode distance was 10, 30, and 50 mA/cm 2 with an anodization time of 30 min. SEM and UV-Vis characterizations were applied to obtain surface morphology and reflectance, respectively. For all samples, the reflectance of PSi was lower than the reflectance of the original silicon surface (no pores). This condition indicates that the PSi is suitable as an anti-reflective layer in a solar cell. However, the PSi of reflectance curves has irregular shapes as a function of wavelength for different electrode distance and the current density. The SEM images confirmed that the pores formed on the silicon surface were inhomogeneous. The pore size decreased with the increase of the electrode distance while it increased as the increase of the current density. There was a correlation between pores size and reflectance at specific wavelength numbers.

Optimization of anodic current density for growth of thick p-type macropore porous silicon

Scalable and Low-Cost Synthesis of Porous Silicon Nanoparticles As High-Performance Lithium-Ion Battery Anode

Deep Silicon Macropores Filled with Copper by Electrodeposition

Influence Of Anodization Current Density On Preparation And Corrosion Of N-Type Macroporous Silicon In 1.0 M Naoh

The Optical Properties of Porous Silicon Produced by Metal-Assisted Anodic Etching

Fabrication of Ordered Macropore Arrays in n-Type Silicon Wafer by Anodic Etching Using Double-Tank Electrochemical Cell

Photo-electrochemical Etching of Macroporous Silicon Arrays Used in Silicon Microchannel Plates

Ultrafast fabrication of high-aspect-ratio macropores in P-type silicon: toward the mass production of microdevices

Porous Si (111) Fabrication Using Electrochemical Anodization: Effects of Electrode Distance and Current Density

Large-scale Fabrication, 3D Tomography, and Lithium-Ion Battery Application of Porous Silicon.

Optimization of Metal-Assisted Etchant Components for Fabrication of Porous Silicon

High Anodic-Voltage Focusing of Charge Carriers in Silicon Enables the Etching of Regularly-Arranged Submicrometer Pores at High Density and High Aspect-Ratio

A novel method of fabricating porous silicon material: ultrasonically enhanced anodic electrochemical etching

Al-assisted Anodic Etched Porous Silicon

Microstructure, Heat Treatment, and Oxidation Study of Porous Silicon Formed on Moderately Doped P-Type Silicon

Achieving a high loading Si anode via employing a triblock copolymer elastomer binder, metal nanowires and a laminated conductive structure

Preparation Of Porous Silicon Using Anodizing And Suppercritical Drying

Systematic Study on Pulse Parameters in Fabricating Porous Silicon-Layered Structures by Pulse Electrochemical Etching

Atomic Force Microscopic Studies of Light-Emitting Porous Silicon

Scalable Preparation of Porous Silicon Nanoparticles and Their Application for Lithium-Ion Battery Anodes

Pulsed Anodic Etching: an Effective Method of Preparing Light-Emitting Porous Silicon