Abstract:In this paper, the effects of slotted height at different fin pitches are analyzed in detail, aiming to investigate the function and optimal ratio of slotted height to fin pitch. In the cases of high Reynolds number for louver fin, the ?bimodal phenomenon? of heat transfer coefficient begins to appear with the increasing slotted height. As the slotted height is about half of the fin pitch, the heat transfer coefficient has a local minimum value, of which there are two peaks on both sides. How-ever, the pressure drop has been increasing with the increasing slotted height. The optimal slotted height under different fin pitches is more instructive than the optimal louver angle. For slit fin, the heat transfer coefficient increases first and then decreases with the increasing slotted height, so does the pressure drop. Meanwhile, as the slotted height is about 0.3~0.45 times and 0.5~0.65 times of fin pitch for louver fin and slit fin, respectively, the comprehensive performance can reach a maximum. The optimal comprehensive performance under 1.2 mm fin pitch is greater than the optimal comprehensive performance under 1.8 mm fin pitch. For lower Reynolds numbers, the optimal comprehensive performance of louver fin is roughly similar to the slit fin. For higher Reynolds numbers, the optimal comprehensive performance of louver fin is greater than that of slit fin.

Experimental Study on Heat Transfer and Flow Resistance Characteristics of Louver Fins

Numerical auxiliary study of charge-air cooler design

Experimental Study on Heat Transfer Performance of the Multi-Region Louver Fins

Study on heat transfer and friction characteristics in fin-tube heat exchangers used for electrical machines cooling

Correlation of Flow and Heat Transfer Characteristics for Multi-louvered Fin

Thermal-hydraulic Performance of Novel Louvered Fin Using Flat Tube Cross-Flow Heat Exchanger

3D Numerical Simulation of the Air Flow Among the Multi-louvered Fins

Flow and Heat Transfer on Compact Smooth Fin Surfaces

Experimental Investigation on Influence of Fin Structures on Particle Deposition and Pressure Drop of Fin-and-tube Heat Exchangers

Test of flow and heat transfer characteristics for offset strip fin

Air Side Performance of a Novel Lanced Fin and Flat Tube Heat Exchanger

Experimental Study on the Heat Transfer and Resistance Characteristics of Pin-Fin Tube

Experimental Study on Heat Transfer and Resistance Characteristics of H-Type Finned Tube

Parametrical Numerical and Experimental Investigation on Heat Transfer and Friction Characteristics of Offset Strip Fins

Experimental Investigation on Heat Transfer and Flow Friction Characteristics in Three Types of Plate Fin-and-Tube Heat Exchangers

Three-dimensional Numerical Simulation of Flow and Heat Transfer on Slit Fins

Experimental Study and Numerical Simulation on Convective Heat Transfer and Pressure Drop of Internally Longitudinal Finned Tube

Experimental Investigation of Heat Transfer Characteristics of Louver Fin-and-tube Heat Exchanger with 5 Mm Diameter Tubes under Wet Conditions

Flow and Heat Transfer in Compact Offset Strip Fin Surfaces

Three-Dimensional Numerical Simulation on the Laminar Flow and Heat Transfer in Four Basic Fins of Plate-Fin Heat Exchangers

NUMERICAL INVESTIGATION ON THE EFFECTS OF SLOTTED HEIGHT ON PERFORMANCE OF LOUVER AND SLIT FINS AT DIFFERENT FIN PITCHES