Abstract:A novel trapezoidal corrugated perforated fin core is proposed in this study. The porosity of the fin surface, or perforations, is indicated to promote the unusual behavior of increasing the heat transfer coefficient, while reducing the friction factor with respect to its non-perforated counterpart, primarily due to surface transpiration, which leads to better flow mixing and successive boundary layer disturbances. This allows the heat exchanger to be built much more compact with a smaller volume and a front area. To highlight this, the results of the computational simulations for velocity and temperature fields in typical trapezoidal corrugated perforated plate-fin ducts are presented. Constant property, fully or periodically developed laminar airflow [Formula: see text] with Reynolds number [Formula: see text] passing through inter-fin passages, with fins at constant wall temperature T, in which the fin walls have perforations equally spaced along the length of the duct, is considered and a parametric study of the effects of the duct geometry, including the variation of the inclination angle [Formula: see text] of the diverging plane, the aspect ratio of the channel or period length and fin density effects [Formula: see text] and the converging-diverging ratio of the plate [Formula: see text], is performed. The results of the Fanning friction factor and the Nusselt number over the wide range of the Reynolds number, which was treated in this study, show the improved performance. The improvement is assessed quantitatively by the area goodness factor ( j/ f) relative to Re, comparison with simple flat channels. It is seen that increasing φ to [Formula: see text] improves the core performance; As φ increases beyond [Formula: see text], performance starts to decrease. j/ f increases with increasing λ; and λ = 3.6 acts as an inflection point. It is better to have a large λ value for lower Re range and vice versa. As ε increases, the performance increases; so, the highest area goodness factor value occurs at [Formula: see text]. In case 11, with [Formula: see text], [Formula: see text], and [Formula: see text] at Re = 200, compared to the non-perforated channel, the friction factor decreases about 11%, and the area goodness factor increases about 72%. Thus, the area goodness factor of the perforated case reaches 0.37.

Analysis of heat transfer and flow resistance characteristics in perforated fin

Flow and Heat Transfer Analysis of Perforated Fin in Compact Heat Exchanger

A Numerical Study on the Air-Side Heat Transfer of Perforated Finned-Tube Heat Exchangers with Large Fin Pitches

Study on heat transfer and friction characteristics in fin-tube heat exchangers used for electrical machines cooling

An Experimental Study on the Air Side Heat Transfer Performance of the Perforated Fin-Tube Heat Exchangers under the Frosting Conditions

Convective Heat Transfer and Pressure Drop of New Triangular Perforated Fin

Numerical auxiliary study of charge-air cooler design

Numerical analysis of the flow and heat transfer characteristics of a staggered perforated louver-finned heat exchanger

Field Synergy Analysis on Convective Heat Transfer and Fluid Flow of a Novel Triangular Perforated Fin

Numerical analysis on heat transfer and flow resistance performances of a heat exchanger with novel perforated wavy fins

CFD ANALYSIS ON FLOW CHARACTERISTICS OF PERFORATED PLATE IN MULTI-STAGE HIGH PRESSURE REDUCING VALVE

Numerical analysis and optimization on flow and heat transfer performance of HPD‐type perforated fins

Numerical Analysis of Header Structure Improvement in a Plate-Fin Heat Exchanger

Aerodynamics Analysis of Superheated Steam Flow Through Multi-Stage Perforated Plates

Numerical study on hydrodynamic characteristics of plate-fin heat exchanger using porous media approach

Numerical study of heat transfer of laminar air flow in perforated trapezoidal corrugated plate-fin ducts

Analysis of Heat Transfer and Flow Characteristics over Serrated Fins with Different Flow Directions

Analysis of Fluid Flow and Heat Transfer in Corrugated Perforated Plate Fin Heat Sinks

The Impact of Square Shape Perforations on the Enhanced Heat Transfer from Fins: Experimental and Numerical Study

Experimental study on resistance characteristics of perforated plates with medium and high porosity in high temperature condition

Numerical Study of Fluid Flow and Heat Transfer in Plate-Fin Heat Transfer Exchanger of Htgr