Abstract:Perforated plates/liners have been widely applied in aeroengines and gas turbines to dissipate unwanted noise. In this work, numerical simulations and experimental study of acoustic damping performance of single-layer perforated plates are conducted. For this, a frequency-domain numerical model is developed via solving 3-dimensional Helmholtz equations. The model validation is performed first by evaluating and comparing the calculated acoustic damping performances of three perforated plates with the experimental results available in literature. These plates are perforated with a number of circle-shaped orifices, which have different porosities σ. Each plate backed by a resonant cavity is placed at the end of a rectangular-shaped pipe with a loudspeaker implemented on the other end. To simulate real engines, a mean flow (also known as bias flow) is applied to pass through the perforated orifices. The effects of 1) the mean flow Mach number Ma, 2) the resonance parameter Q, 3) the porosity σ and 4) the plate thickness T are studied one at a time. Acoustic damping performance of these plates is characterized by using sound absorption coefficient α and specific acoustic impedance z. It is found that sound absorption coefficient α is increased first and then decreased with increased Ma. The real part of z characterizing acoustic resistance/damping is linearly increased, as Ma is increased. However, the imaginary part of z characterizing acoustic reactance remains almost unchanged. It is also found that the presence of the bias flow greatly increases the maximum sound absorption coefficient αmax by approximately 33% in comparison with that of without mean flow. The plate thickness T is shown to shift the frequency corresponding to the maximum sound absorption coefficient. Comparing the present simulation results with the experimental and analytical ones available in the literature reveals that good agreement is obtained at lower frequency range. However, as frequency is increased, the model predicts that the bias flow leads to the local αmax reduced by 15%. The plate with a larger thickness is associated with another local αmax, which is not observed for a lower thickness plate. Finally, experimental measurements of the acoustic damping of 2 single-layer in-duct perforated plates are performed. The frequency-domain model is then applied to simulate the experiment. Good agreement between our experimental and numerical results is obtained.

Experimental study on resistance characteristics of perforated plates with medium and high porosity in high temperature condition

Numerical Study on Performance of Perforated Plate Applied to Cryogenic Fluid Flowmeter

Study of Pressure Drop-Flow Rate and Flow Resistance Characteristics of Heated Porous Materials under Local Thermal Non-Equilibrium Conditions

Experimental Study of Pressure Drop-Flow Rate Characteristics of Heated Tight Porous Materials

Research on Resistance Characteristics of Electrostatic Precipitator's Perforated Plates With Medium and High Porosity

Theoretical and Experimental Investigation of Flow Rate Characteristics of Sintered Metal Porous Media

Aerodynamics Analysis of Superheated Steam Flow Through Multi-Stage Perforated Plates

Flow and Heat Transfer Analysis of Perforated Fin in Compact Heat Exchanger

Analysis of heat transfer and flow resistance characteristics in perforated fin

Mach number analysis on multi-stage perforated plates in high pressure reducing valve

CFD ANALYSIS ON FLOW CHARACTERISTICS OF PERFORATED PLATE IN MULTI-STAGE HIGH PRESSURE REDUCING VALVE

Numerical study on hydrodynamic characteristics of plate-fin heat exchanger using porous media approach

Experimental Investigation of Flow and Heat Transfer Characteristics in Double-Laminated Sintered Woven Wire Mesh

Numerical Modelling of the Gas Flow Through Perforated Plates

THE FLOW RESISTANCE CHARACTERISTICS OF PERFORATED LINER DUCTS

Study on the Effect of Porosity on the Reflection Coefficient and Wave Pressure on the Partially Perforated Plates

Study on the Acoustic Performance of Perforated Duct Muffler

3D numerical investigation of energy transfer and loss of cavitation flow in perforated plates

Experimental and Frequency-Domain Study of Acoustic Damping of Single-Layer Perforated Plates

Presence of a porous medium and the arrangements effects on the performance of an air-cooled heat exchanger: an experimental study for heat transfer and pressure drop

Attenuation Effects of Perforated Plates with Heterogeneously Distributed Holes on Combustion Instability in a Spray Flame Combustor