Abstract:Generally, the function of thermal interface material (TIM) is filling rough surfaces, eradicating air pockets, decreasing thermal resistance, and improving heat dissipating effects. On this basis, we provide the TIM with another identity, "adhesion", rendering it not only play a role of heat dissipation, but also serve as an adhesive to bond contacting surfaces. In this work, nano- to microscopic liquid metal (LM) droplets are embedded into the epoxy matrix to fabricate a LM-epoxy in-situ cured composite. By adding the curing agent, the LM-epoxy composite is cured into an entity structure, transforming from an amorphous grease state to a self-adaptive pad state. When the average droplet size is in a reasonable range of approximately 5–25 μm, the composite's thermal resistance ( R total ) decreases to 2.19 mm 2 K/W at 70% volume fraction with its adhesive strength of 0.497 MPa, and the thermal conductivity ( k TIM ) could increase to 10.05 W/(m·K) at 85%. Both R total and k TIM change rapidly for droplet size approximately ranging from 10 2 nm to 10 1 μm and then tend to level off when it further increases to 10 2 μm. A conception of equivalent contact thickness, δ, is presented to elucidate the contacting thermal resistance R c , and set up predictive models of R total for different volume fractions by considering the microscopic interfacial thermal resistance R b between filler and matrix or not. This composite simultaneously possesses characteristics of the low thermal resistance like thermal grease, the whole entity like thermal pad, and the anti-leak characteristics by in-situ cured process. Actual cooling tests show it has a considerable temperature difference of 4.75 °C lower than the commercial thermal grease at 650 W heating power. This in-situ cured strategy, via decreasing the thermal resistance and solving the problem of LM leakage, remarkably promotes the LM-TIMs achieving a broader application prospect in the future.

Development Of High Adhesion Nano-Thermal Interface Materials For Electronics Packaging Applications

Low Interfacial Thermal Resistance Between Crossed Ultra-Thin Carbon Nanothreads

Anti-leak, self-adaptive liquid metal-epoxy in-situ cured composites with ultra-low thermal resistance via flexible droplet inclusions

Graphene/Polyolefin Elastomer Films as Thermal Interface Materials with High Thermal Conductivity, Flexibility, and Good Adhesion

Balancing Interfacial Toughness and Intrinsic Dissipation for High Adhesion and Thermal Conductivity of Polymer-Based Thermal Interface Materials

High damping, soft and reprocessable thermal interface materials inspired by the microstructure of skin tissue

High‐Temperature Degradation Mechanism of Interfacial Thermal Resistance Based on Submicron Silver Adhesion

Spatial Thermal Conductivity Variation of Particulate-Filled Thermal Interface Materials

Joint‐Inspired Liquid and Thermal Conductive Interface for Designing Thermal Interface Materials with High Solid Filling yet Excellent Thixotropy

Thermal and Insulating Properties of Epoxy/Aluminum Nitride Composites Used for Thermal Interface Material

Assessment of Self‐Assembled Monolayers As High‐Performance Thermal Interface Materials

Highly Thermally Conductive and Flexible Thermal Interface Materials with Aligned Graphene Lamella Frameworks

Highly conductive thermal interface materials with vertically aligned graphite-nanoplatelet filler towards: High power density electronic device cooling

Silver Nanoparticle-Based Thermal Interface Materials with Ultra-Low Thermal Resistance for Power Electronics Applications

Liquid Metal Nano/micro-Channels As Thermal Interface Materials for Efficient Energy Saving

Silver-based Thermal Interface Materials with Low Thermal Resistance

Double-Sided Transferred Carbon Nanotube Arrays for Improved Thermal Interface Materials

A Full-component recyclable Epoxy/BN thermal interface material with anisotropy high thermal conductivity and interface adaptability

Encapsulated carbon nanotube array as a thermal interface material compatible with standard electronics packaging

Soft and Self‐Adhesive Thermal Interface Materials Based on Vertically Aligned, Covalently Bonded Graphene Nanowalls for Efficient Microelectronic Cooling

A Review of Advanced Thermal Interface Materials with Oriented Structures for Electronic Devices