Abstract:State-of-the-art endoscopy systems require electronics allowing for real-time, bidirectional data transfer. Proposed are 2.4-GHz low-power transceiver analog front-end circuits for bidirectional high data rate wireless telemetry in medical endoscopy applications. The prototype integrates a low-IF receiver analog front-end [low noise amplifier (LNA), double balanced down-converter, bandpass-filtered automatic gain controlled (AGC) loop and amplitude-shift keying (ASK) demodulator], and a direct up-conversion transmitter analog front-end [20-MHz IF phase-locked loop (PLL) with well-defined amplitude control circuit, ASK modulator, up-converter, and power amplifier] on a single chip together with an internal radio frequency oscillator and local oscillating (LO) buffers. Design tradeoffs have been made over the boundaries of the different building blocks to optimize the overall system performance. All building blocks feature circuit topologies that enable comfortable operation at low power consumption. The circuits have been implemented in a 0.25-microm CMOS process. The measured sensitivity of the receiver analog front-end is -70 dBm with a data rate of 256 kbps, and the measured output power of the transmitter analog front-end could achieve -23 dBm with a data rate of 1 Mbps. The integrated circuit consumes a current of 6 mA in receiver mode and 5.6 mA in transmitter mode with a power supply of 2.5 V. This paper shows the feasibility of achieving the analog performance required by the wireless endoscopy capsule system in 0.25 microm CMOS.

An ASK-Based IF Receiver for Wireless Endoscopy Capsule Systems

A receiver analog front-end for body sensor network

A Low-Power, High Data-Rate CMOS ASK Transmitter for Wireless Capsule Endoscopy

A 2.4ghz Low Power ASK Transmitter for Wireless Capsule Endoscope Applications

A 2.4ghz Low Power Wireless Transceiver Analog Front-End for Endoscopy Capsule System

A Fast-Settling Wideband-IF ASK Baseband Circuit for a Wireless Endoscope Capsule

Low-power transceiver analog front-end circuits for bidirectional high data rate wireless telemetry in medical endoscopy applications

A Sub-GHz CMOS Low-IF Receiver for Lot Applications

Design of a Low Power 60ghz OOK Receiver in 65nm CMOS Technology

Low Power High Data Rate Wireless Endoscopy Transceiver.

A Novel Low Power ASK Receiver with AGC Loop

A 7.2mw 15mbps Ask Cmos Transmitter For Ingestible Capsule Endoscopy

A Low-Power High-Data-Rate ASK IF Receiver with a Digital-Control AGC Loop

Low Power Ultra-Wideband Wireless Telemetry System for Capsule Endoscopy Application

A Low Power Digital Baseband for Wireless Endoscope Capsule

A High-Performance ASK Demodulator for Wireless Recovery System

A Compact and Low-Power Wireless Receiver for Implanted Medical Backscatter

Using Asynchronous Circuits for Communications in Wireless Endoscopic Capsule

Analog-digital Mixed-Mode IC Design for Miniaturized Bi-Directional Wireless Endoscopy Capsule

Low Power Transmitter for Capsule Endoscope

Ultra low-power transceiver with novel FSK modulation technique and efficient FSK-to-ASK demodulation