Abstract:State-of-the-art endoscopy systems require electronics allowing for real-time, bidirectional data transfer. Proposed are 2.4-GHz low-power transceiver analog front-end circuits for bidirectional high data rate wireless telemetry in medical endoscopy applications. The prototype integrates a low-IF receiver analog front-end [low noise amplifier (LNA), double balanced down-converter, bandpass-filtered automatic gain controlled (AGC) loop and amplitude-shift keying (ASK) demodulator], and a direct up-conversion transmitter analog front-end [20-MHz IF phase-locked loop (PLL) with well-defined amplitude control circuit, ASK modulator, up-converter, and power amplifier] on a single chip together with an internal radio frequency oscillator and local oscillating (LO) buffers. Design tradeoffs have been made over the boundaries of the different building blocks to optimize the overall system performance. All building blocks feature circuit topologies that enable comfortable operation at low power consumption. The circuits have been implemented in a 0.25-microm CMOS process. The measured sensitivity of the receiver analog front-end is -70 dBm with a data rate of 256 kbps, and the measured output power of the transmitter analog front-end could achieve -23 dBm with a data rate of 1 Mbps. The integrated circuit consumes a current of 6 mA in receiver mode and 5.6 mA in transmitter mode with a power supply of 2.5 V. This paper shows the feasibility of achieving the analog performance required by the wireless endoscopy capsule system in 0.25 microm CMOS.

Using Asynchronous Circuits for Communications in Wireless Endoscopic Capsule

VLSI Design of Baseband Channel Controller in Wireless Endoscope Capsule

A Highly-integrated Non-magnetic Passive Circulator Based on Rotary Traveling-wave Oscillator and Spatio-temporal Conductivity Modulation in 130 Nm CMOS

A 2.4ghz Low Power Wireless Transceiver Analog Front-End for Endoscopy Capsule System

A Low Power Digital Baseband for Wireless Endoscope Capsule

A 11 Mw 2.4 GHz 0.18 Μm CMOS Transceivers for Wireless Sensor Networks

A 0.6V 32.5mw Highly Integrated Receiver for 2.4ghz ISM-Band Applications

A Low Power CMOS Phase-Switching Prescaler for 1.8–2.4 GHz Wireless Communications

A Low-Power Digital IC Design Inside the Wireless Endoscopic Capsule

Low Power High Data Rate Wireless Endoscopy Transceiver.

Low-power transceiver analog front-end circuits for bidirectional high data rate wireless telemetry in medical endoscopy applications

A Wireless Capsule Endoscope System with Low-Power Controlling and Processing ASIC

A SoC with 3.9mW 3Mbps UHF transmitter and 240μW MCU for capsule endoscope with bidirectional communication

2004 IEEE International Workshop on Biomedical Circuits & Systems A NOVEL LOW POWER IC DESIGN FOR BI-DIRECTIONAL DIGITAL WIRELESS ENDOSCOPY CAPSULE SYSTEM

An ASK-Based IF Receiver for Wireless Endoscopy Capsule Systems

A Fast-Settling Wideband-IF ASK Baseband Circuit for a Wireless Endoscope Capsule

A 2.4ghz Low Power ASK Transmitter for Wireless Capsule Endoscope Applications

An Ultra Low Power Baseband Transceiver IC for Wireless Body Area Network in 0.18- \mu M CMOS Technology

An Asynchronous Design Method and Its Application on a Low-Power RFID Baseband Processor

Analog-digital Mixed-Mode IC Design for Miniaturized Bi-Directional Wireless Endoscopy Capsule

Low Power Transmitter for Capsule Endoscope