Abstract:This article presents a fully differential high-dynamic-range direct-conversion receiver for sub-1-GHz band applications in a 180-nm CMOS technology. The integrated self-adaptive multipart automatic gain control (AGC) loops are designed to cope with large input signal. In the radio frequency (RF) domain, a gain-adjustable noise-canceling balun low-noise amplifier (LNA) and a high-linearity RF variable gain amplifier (VGA) are co-designed to keep a steady differential output power for the mixer stage. In baseband (BB), a novel gain distribution method is proposed to protect BB circuits from saturation. To prove the concept, one of the most typical and strict application scenarios in the sub-1-GHz band, digital television (DTV) standard, is analyzed and chosen as the design target. The receiver achieves a noise figure (NF) of 3.6–4.6 dB in the ultrahigh-frequency (UHF) band. A wide gain tuning range of 128.8 dB is realized in this work, featuring fully integrated AGC loops. The programmable bandwidth of the low-pass filter (LPF) can be adjusted from 1 to 4 MHz, supporting 2-/6-/7-/8-MHz signal channels. The maximum in-band third-order input-referred intercept point (IIP3) is 10 dBm under the conversion gain of 0 dB. The receiver consumes 49.56 mA from a 1.8-V voltage supply and occupies an area of 3.56 mm2.

A Low-Power High-Data-Rate ASK IF Receiver with a Digital-Control AGC Loop

A Novel Low Power ASK Receiver with AGC Loop

A Sub-1-GHz Band High-Dynamic-Range Receiver with Integrated Self-Adaptive Multipart AGC Loops

A Sub-GHz CMOS Low-IF Receiver for Lot Applications

A Low-Power Low-Noise Direct-Conversion Front-End with Digitally Assisted IIP2 Background Self Calibration

A 0.1-1.9Ghz 65nm CMOS Variable-Gain Mixer-First Receiver with DSA and Noise-Shaping TIA.

Low power high data rate GHz range receiver in 40nm CMOS technology

A Low Power 45-Db DR All-Digital Assisted AGC Loop for a GNSS Receiver in 0.18 Um CMOS

An ASK-Based IF Receiver for Wireless Endoscopy Capsule Systems

A low-power IF circuit with 5-dB minimum input SNR for GFSK low-IF receivers

A 49-dB DR wide locking range hybrid AGC for an ISM-band receiver in 0.18 um CMOS

A Wideband and Low Power Dual-Band ASK Transceiver for Intra/inter-Chip Communication

A Low-power ASK Demodulator for Wireless Power and Data Transfer Systems Supporting Ultra-low Modulation Depth of 0.03%.

A 2-Mw 50-Db DR Wideband Hybrid AGC for a GNSS Receiver in 65 Nm CMOS

A 7.9 Μa Multi-Step Phase-Domain ADC for GFSK Demodulators

A low power self-sampling IF FSK receiver

Novel Low-Voltage / Low-Power ASK Demodulator for RFID Tags

A High-Performance ASK Demodulator for Wireless Recovery System

A 110pj/bit Star- 16QAM 915mhz Band Ultra-Low Power Receiver Based on Polar Architecture

2.4Ghz 20mb/s FSK Receiver Front-End and Transmitter Modulation PLL Design for Energy-Efficient Short-Range Communicaiton

A Low-Power All-Digital GFSK Demodulator with Robust Clock Data Recovery.