Abstract:This paper presents the design, optimization and simulation of a radio frequency (RF) micro-electromechanical system (MEMS) switch. The capacitive RF-MEMS switch is electrostatically actuated. The structure contains a coplanar waveguide, a big suspended membrane, four folded beams to support the membrane and four straight beams to provide the bias voltage. The switch is designed in standard 0.35 µm complementary metal oxide semiconductor process and has a very low pull-in voltage of 3.04 V. Taguchi method and weighted principal component analysis is employed to optimize the geometric parameters of the beams, in order to obtain a low spring constant, low pull-in voltage, and a robust design. The optimized parameters were obtained as w = 2.5 µm, L1 = 30 µm, L2 = 30 µm and L3 = 65 µm. The mechanical and electrical behaviours of the RF-MEMS switch were simulated by the finite element modeling in software of COMSOL Multiphysics 4.3® and IntelliSuite v8.7®. RF performance of the switch was obtained by simulation results, which are insertion loss of −5.65 dB and isolation of −24.38 dB at 40 GHz.

Time Response and Dynamic Behavior of Electrostatic Driven RF MEMS Capacitive Switches for Phase Shifter Applications

Time Response Characteristic Investigation of the Capacitive Switches for Distributed MEMS Phase Shifters

Analysis and design of MEMS capacitive switch for microwave distributed phase shifter

Investigation of Design and Vibration Modes of Low-Voltage Driven RF MEME Capacitive Switch for Millimeter Distributed Phase Shifter

Actuated Voltage Shift Mechanisms Of Mems Capacitive Switch Based On Distributed Phase Shifter

Electromechanical Design of Low-Driven Voltage Capacitive Switches Based on Ka-Bank Distributed MEMS Phase Shifters

Intermodulation Distortion in MEMS Capacitive Switches under High RF Power

Characteristics of phase delay in capacitive pick-off circuits for MEMS resonators

Study on dynamic characterization of a shunt capacitive RF MEMS switch

Effects Of Structure Parameters And Stress For Capacitive Switches Mems Bridge On Time Response

Analysis of Electromagnetic Interference of a Capacitive RF MEMS Switch During Switching

Design and Fabrication of a Capacitive Series RF MEMS Switch

Study on switching times of RF/Microwave MEMS shunt switches

A laterally thermally-actuated RF MEMS capacitive switch with parylene as dielectric layer

Design, optimization and simulation of a low-voltage shunt capacitive RF-MEMS switch

Design and Analysis of A Micromachined Capacitive Rf Shunt Switch with Composite Membrane

Transient S-parameters of Millimeter-Wave MEMS Switch

Analysis of Shunt RF MEMS Capacitive Switches Parameters

Design and Fabrication of a Low Insertion Loss Capacitive RF MEMS Switch with Novel Micro-Structures for Actuation

Fabrication of a Micromachined Capacitive Switch Using the CMOS-MEMS Technology

A Lateral RF MEMS Capacitive Switch Utilizing Parylene As Dielectric