Abstract:The 10 MW high temperature gas-cooled reactor - test module (HTR-10) reached the first critical at the end of year 2000, and has been running for over 9 years safely and stably till now. Comparing with the Pressure Water Reactor (PWR), HTR-10 has many different characteristics, such as core construction, special fuel elements, helium coolant and so on. Thus the thermal hydraulic parameter measurement has special requirement and it is indispensable to select or develop some new class 1E instrumentation and devices.This paper describes measurement requirements, measurement method and measurement instrumentations for measuring coolant temperature, primary loop pressure, primary loop mass flow rate, primary loop humidity, main steam pressure, feedwater mass flow rate, in-core components temperature, pressure vessel surface temperature. The class 1E sheathed thermocouples and thermocouple penetration assembly, the class 1E orifice plate throttle device, and the data acquisition and supervision system that were developed by the Institute of Nuclear and New Energy Technology (INET) according to the criteria IEEE 323 and IEEE 344 are introduced in detail.HTR-10 has been operated successfully for over 9 years up to the present. The operation and maintenance experience of above-mentioned instrumentations shows they are safe and reliable at normal and abnormal conditions.The experience described in this paper is valuable for the latter 2 X 250 MW modular high temperature gas-cooled reactor.

Development of Cover Seal Mechanism of Spent Fuel Element Shipping Cask in 10 MW High-Temperature Gas-Cooled Reactor

Spent Fuel Storage in 10 MW High Temperature Gas-Cooled Reactor

Hydraulic pressure test of pressure vessel of 10 MW high temperature gas-cooled reactor

Experimental Study on the Residual Heat Removal System in HTR-10

Safety Analysis of Spent Fuel Element Storage in 10 MW High Temperature Gas-Cooled Reactor

Dynamic Character and Operation ProcedureModel of 10MW High Temperature Gas-coOled Test Reactor

Numerical Analysis of the Residual Heat Removal for the Spent Fuel Storage Tank of HTR-10

Commissioning Procedures of the 10 Mw High Temperature Gas-Cooled Reactor-Test Module

Thermal Hydraulic Instrumentation System of the HTR-10

A Comprehensive Study of the 14C Source Term in the 10 MW High-Temperature Gas-Cooled Reactor

Research and Development on the First-loading Coated Fuel Particles for the 10 MW High Temperature Gas-cooled Reactor

Commissioning of HTR-10 before Fueling

Sealing behavior of the HTR-10 pressure vessel flanges

Research and Development of Fuel Element for Chinese 10 MW High Temperature Gas-cooled Reactor.

Design and Tests for the HTR-10 Control Rod System

Structural Design of Ceramic Internals of Htr-10

Natural Safety Analysis of the Spent Fuel Residual Heat Removal in Loading and Storage Process of HTR-10

Design, Operation And Maintenance Of Thermal Hydraulic Instrumentation System Of Htr-10

Radiation Protection Practices During the Helium Circulator Maintenance of the 10 MW High Temperature Gas-Cooled Reactor-Test Module (HTR-10)

Design and Manufacture of the Fuel Element for the 10 MW High Temperature Gas-Cooled Reactor

Full Performance Test of the Steam Safety Valves for 10 MW High Temperature Gas-cooled Reactor