Abstract:ABSTRACTWhile assessing the environmental impact of nuclear power plants, researchers have focused their attention on radiocarbon (14C) owing to its high mobility in the environment and important radiological impact on human beings. The 10 MW high-temperature gas-cooled reactor (HTR-10) is the first pebble-bed gas-cooled test reactor in China that adopted helium as primary coolant and graphite spheres containing tristructural-isotropic (TRISO) coated particles as fuel elements. A series of experiments on the 14C source terms in HTR-10 was conducted: (1) measurement of the specific activity and distribution of typical nuclides in the irradiated graphite spheres from the core, (2) measurement of the activity concentration of 14C in the primary coolant, and (3) measurement of the amount of 14C discharged in the effluent from the stack. All experimental data on 14C available for HTR-10 were summarized and analyzed using theoretical calculations. A sensitivity study on the total porosity, open porosity, and percentage of closed pores that became open after irradiating the matrix graphite was performed to illustrate their effects on the activity concentration of 14C in the primary coolant and activity amount of 14C in various deduction routes.

Research and Development of Fuel Element for Chinese 10 MW High Temperature Gas-cooled Reactor.

Research and Development on the First-loading Coated Fuel Particles for the 10 MW High Temperature Gas-cooled Reactor

Design and Manufacture of the Fuel Element for the 10 MW High Temperature Gas-Cooled Reactor

Manufacture and Characteristics of Spherical Fuel Elements for the Htr-10

Research and Manufacture of Spherical Fuel Element for HTR-PM Demonstration Project

Fabrication Technology of Spherical Fuel Element for HTR-10

Development of spherical fuel element detector

A Comprehensive Study of the 14C Source Term in the 10 MW High-Temperature Gas-Cooled Reactor

Fuel Irradiation of the First Batches Produced for the Chinese HTR-10

Fuel Management of HTR-10

Source Term Analysis and Sorting Scheme in Post-Irradiation Spherical Pyrometric Elements

Preparation of Uo2 Kernel for Htr-10 Fuel Element

Program of Fuel Element in HTR-10

Fabrication of Spherical Fuel Element for 10 MW High Temperature Gas-cooled Reactor

Irradiation Testing of Matrix Material for Spherical HTR-10 Fuel Elements

Preparation of Spherical Fuel Elements for Htr-Pm in Inet

Conversion of Ceramic Uo2 Pellets for Htr-10 Fuel Elements into Nitrate with N2o4

Structural Design of Ceramic Internals of Htr-10

Preparation and Performance of Fully Ceramic Fuel Element Using Silicon Carbide As Coating Layers

A New Design of Composite Fuel with Zr-coated TRISO Particles Dispersed in Metal Matrix

Present status of research and development for HTR in China