Abstract:The 10 MW High Temperature Gas-cooled Reactor (HTR-10) constructed at the Institute of Nuclear Energy Technology (INET), Tsinghua University in China reached its first criticality by the end of 2000. The temperature measuring system of the in-core components is described in this paper. This system consists of the thermocouple penetration assembly of the reactor pressure vessel (TPARPV), the thermocouple penetration assembly of the reactor containment (TPARC) and the distributed computer-based data acquisition and processing system (DCS). Some new techniques were developed and applied, such as the thermocouple penetration technology under the high temperature and high-pressure environment and the laser welding technique. The TPARPV is the key measurement device and is described in detail. The general behavior of the TPARPV and TPARC was confirmed under HTR-10 operating conditions. The helium leakage rate of the TPARPV is 1×10-7Pa-m3/s while the helium leakage rate of the TPARC is less than 1×10-2 Pa-m3/s. The insulation resistance of the sheathed thermocouple is more then 109Ω. The temperature measurement error of the system is 2.3°C. The results of testing and field inspection and operation demonstrate that the design of the temperature measuring system is reasonable and reliable and that the performance of the system satisfies the design requirements of the HTR-10. These new techniques used in the temperature measuring system can be applied not only to other high temperature gas-cooled reactors but to various reactor types as well.

Structural Design of Ceramic Internals of Htr-10

The design features of the HTR-10

Thermo-mechanical Analysis of a Multilayer Hollow Cylindrical Thermal Protection Structure with Functionally Graded Ultrahigh-Temperature Ceramic to Be Heat Resistant Layer

Thermal Hydraulic Instrumentation System of the HTR-10

Several Mechanical Problems In High Temperature Gas-Cooled Reactor

Design and Tests for the HTR-10 Control Rod System

Thermal Hydraulic Calculation of the HTR-10 for the Initial and Equilibrium Core

The design and thermohydraulics study of the HTR-10 High Temperature Helium Experimental Loop

Manufacture and Characteristics of Spherical Fuel Elements for the Htr-10

Experimental Study on the Residual Heat Removal System in HTR-10

Research and Development of Fuel Element for Chinese 10 MW High Temperature Gas-cooled Reactor.

Research and Measure of Tritium and Carbon 14 in HTR 10

The Thermohydraulics and Dynamics Study of the HTR-10 High Temperature Helium Experimental Loop

Design of the Exhaust System in the Confinement of the HTR-10

Research and Development on the First-loading Coated Fuel Particles for the 10 MW High Temperature Gas-cooled Reactor

Dynamic Character and Operation ProcedureModel of 10MW High Temperature Gas-coOled Test Reactor

The primary loop confinement and pressure boundary system of the HTR-10

Design, Operation And Maintenance Of Thermal Hydraulic Instrumentation System Of Htr-10

Licensing of the construction permit of the HTR-10

Temperature Measuring System of the In-core Components for Chinese 10 MW High Temperature Gas-cooled Reactor.

Two Phase Flow Stability in the HTR-10 Steam Generator