Abstract:Safety demonstration tests on the 10 MW High Temperature Gas-cooled Reactor-Test Module (HTR-10) were conducted to verify the inherent safety characteristics of modular High Temperature Gas-cooled Reactors (HTGRs) as well as to obtain the reactor core and primary cooling system transient data for validation of HTGR safety analysis models and codes. As one of these safety demonstration tests, a simulated anticipated transient without scram (ATWS) test called loss of forced cooling by tripping the helium circulator without reactor scram was carried out at 100% rated power level in July, 2005.This paper simulates the reactor transient behaviour during the test by using the THERMIX code system. The reactor power transition and a comparison with the test result are presented. Owing to the negative temperature coefficient of reactivity, the reactor undergoes a self-shutdown after the stop of the helium circulator and keeps subcritical till the end of the test. Due to the loss of forced cooling, the residual heat is slowly transferred from the core to the Reactor Cavity Cooling System (RCCS) by conduction, radiation and natural convection. The thermal response of this heat removal process is investigated. The calculated and test temperature transients of the measuring points in the reactor internals are given and the differences are preliminarily discussed. With respect to the safety features of the HTR-10, it is of most importance that the maximum fuel center temperature is always lower than 1230 degrees C which is the limited value at the first phase of the HTR-10 project.The simulation and test results show that the HTR-10 has the built-in passive safety features, and the THERMIX code system is applicable and reasonable for simulating and analyzing the helium circulator trip ATWS test.

Dynamic Character and Operation ProcedureModel of 10MW High Temperature Gas-coOled Test Reactor

Dynamic simulation and optimization of load change operation of high-temperature gas-cooled reactor pebble-bed module

Experimental Study on the Residual Heat Removal System in HTR-10

Simulation of the HTR-10Primary Mass Flow Variation Test

Three-dimensional Numerical Investigation of Heat Transfer Process in the Reactor Cavity of HTR-10

Thermal Hydraulic Instrumentation System of the HTR-10

A one-dimensional code of the passive residual heat removal system for the modular high temperature gas-cooled reactor

Operation and Control Simulation of a Modular High Temperature Gas Cooled Reactor Nuclear Power Plant

Temperature Response of the HTR-10 during the Power Ascension Test

Design, Operation And Maintenance Of Thermal Hydraulic Instrumentation System Of Htr-10

Lumped Parameter Dynamic Model of 10 MW High-Temperature Gas-Cooled Reactor

Simulation And Analysis Of Helium Circulator Trip Atws Test At Full Power On The Htr-10

A Personal Computer-Based Simulation-And-Control-Integrated Platform for 10-Mw High-Temperature Gas-Cooled Reactor

Study on dynamic characteristics of HTR-10 at full power operation

Primary System Aerodynamic Characteristics and Associated Circulator Operational Performance of Htr-10

Control Scheme Research of 10MW High Temperature Gas-Cooled Reactor

Commissioning Procedures of the 10 Mw High Temperature Gas-Cooled Reactor-Test Module

Research Method and Two-Phase Flow Stability of the Steam Generator of HTR-10

Temperature Measuring System of the In-core Components for Chinese 10 MW High Temperature Gas-cooled Reactor.

A high-reliability thermocouple temperature-measuring unit applicable to the 10-MW high-temperature gas-cooled reactor

Temperature Analysis of the HTR-10 after Full Load Rejection