Abstract:The 10 MW High Temperature Gas-cooled Reactor (HTR-10) constructed at the Institute of Nuclear Energy Technology (INET), Tsinghua University in China reached its first criticality by the end of 2000. The temperature measuring system of the in-core components is described in this paper. This system consists of the thermocouple penetration assembly of the reactor pressure vessel (TPARPV), the thermocouple penetration assembly of the reactor containment (TPARC) and the distributed computer-based data acquisition and processing system (DCS). Some new techniques were developed and applied, such as the thermocouple penetration technology under the high temperature and high-pressure environment and the laser welding technique. The TPARPV is the key measurement device and is described in detail. The general behavior of the TPARPV and TPARC was confirmed under HTR-10 operating conditions. The helium leakage rate of the TPARPV is 1×10-7Pa-m3/s while the helium leakage rate of the TPARC is less than 1×10-2 Pa-m3/s. The insulation resistance of the sheathed thermocouple is more then 109Ω. The temperature measurement error of the system is 2.3°C. The results of testing and field inspection and operation demonstrate that the design of the temperature measuring system is reasonable and reliable and that the performance of the system satisfies the design requirements of the HTR-10. These new techniques used in the temperature measuring system can be applied not only to other high temperature gas-cooled reactors but to various reactor types as well.

Hydraulic pressure test of pressure vessel of 10 MW high temperature gas-cooled reactor

Experiment and Verification Test of the Once-Through Steam Generator of the 10 Mw High-Temperature Gas-Cooled Reactor Flow Stability of the Once-Through Steam Generator

Full Performance Test of the Steam Safety Valves for 10 MW High Temperature Gas-cooled Reactor

Thermocouple Penetration Assemblies for Pressure Vessel of 10MW High Temperature Gas-Cooled Reactor

Pre-service Tightness Tests of HTR-10 Primary Loop Pressure Boundary System

Design, Operation And Maintenance Of Thermal Hydraulic Instrumentation System Of Htr-10

Experimental Study on the Residual Heat Removal System in HTR-10

Temperature Measuring System of the In-core Components for Chinese 10 MW High Temperature Gas-cooled Reactor.

Temperature Response of the HTR-10 during the Power Ascension Test

Thermal Hydraulic Instrumentation System of the HTR-10

Experimental and Operational Verification of the HTR-10 Once-Through Steam Generator (SG): Heat-transfer and Hydrodynamic Features of the Once-Through Steam Generator

Development of Cover Seal Mechanism of Spent Fuel Element Shipping Cask in 10 MW High-Temperature Gas-Cooled Reactor

Main bolt stretcher for pressurized vessel of 10 MW high temperature reactor

Commissioning Procedures of the 10 Mw High Temperature Gas-Cooled Reactor-Test Module

Simulation of the HTR-10Primary Mass Flow Variation Test

A Comprehensive Study of the 14C Source Term in the 10 MW High-Temperature Gas-Cooled Reactor

ICONE23-1474 DESIGN AND THERMAL-HYDRAULIC ANALYSIS OF SUPERCRITICAL STEAM GENERATOR IN HIGH-TEMPERATURE GAS-COOLED REACTOR

Two Phase Flow Stability in the HTR-10 Steam Generator

Sealing behavior of the HTR-10 pressure vessel flanges

Research Method and Two-Phase Flow Stability of the Steam Generator of HTR-10

Primary System Aerodynamic Characteristics and Associated Circulator Operational Performance of Htr-10