Abstract:The 10 MW High Temperature Gas-cooled Reactor (HTR-10) constructed at the Institute of Nuclear Energy Technology (INET), Tsinghua University in China reached its first criticality by the end of 2000. The temperature measuring system of the in-core components is described in this paper. This system consists of the thermocouple penetration assembly of the reactor pressure vessel (TPARPV), the thermocouple penetration assembly of the reactor containment (TPARC) and the distributed computer-based data acquisition and processing system (DCS). Some new techniques were developed and applied, such as the thermocouple penetration technology under the high temperature and high-pressure environment and the laser welding technique. The TPARPV is the key measurement device and is described in detail. The general behavior of the TPARPV and TPARC was confirmed under HTR-10 operating conditions. The helium leakage rate of the TPARPV is 1×10-7Pa-m3/s while the helium leakage rate of the TPARC is less than 1×10-2 Pa-m3/s. The insulation resistance of the sheathed thermocouple is more then 109Ω. The temperature measurement error of the system is 2.3°C. The results of testing and field inspection and operation demonstrate that the design of the temperature measuring system is reasonable and reliable and that the performance of the system satisfies the design requirements of the HTR-10. These new techniques used in the temperature measuring system can be applied not only to other high temperature gas-cooled reactors but to various reactor types as well.

Pre-service Tightness Tests of HTR-10 Primary Loop Pressure Boundary System

The primary loop confinement and pressure boundary system of the HTR-10

Research on Improving the System Sensitivity for Hot Helium Leak Test

Hydraulic pressure test of pressure vessel of 10 MW high temperature gas-cooled reactor

Experimental Study on the Residual Heat Removal System in HTR-10

Thermal Hydraulic Instrumentation System of the HTR-10

Primary System Aerodynamic Characteristics and Associated Circulator Operational Performance of Htr-10

Design and Performance Test of the Helium Safety Valves for HTR-10

Design and Tests for the HTR-10 Control Rod System

Stress and Seismic Calculation of HTR-10 Primary Loop Pressure Relief System (K417)

Design, Operation And Maintenance Of Thermal Hydraulic Instrumentation System Of Htr-10

Full Performance Test of the Steam Safety Valves for 10 MW High Temperature Gas-cooled Reactor

Simulation of the HTR-10Primary Mass Flow Variation Test

Design of the Exhaust System in the Confinement of the HTR-10

Thermal Hydraulic Calculation of the HTR-10 for the Initial and Equilibrium Core

The design features of the HTR-10

Temperature Measuring System of the In-core Components for Chinese 10 MW High Temperature Gas-cooled Reactor.

Experiment and Verification Test of the Once-Through Steam Generator of the 10 Mw High-Temperature Gas-Cooled Reactor Flow Stability of the Once-Through Steam Generator

Design and test requirements of main loop shut-off valves in the helium test loop

Simulation Method for Running-in Phase of HTR-10

Research on requirements of helium valves in HTR-10