Abstract:This study examines the feasibility of in-situ synthesis of various nitride and oxide precipitates and their impact on Fe-12Cr-6Al alloy characteristics using an N 2 reactive gas atmosphere and Ti addition during the L-PBF process. This study focused on elucidating the effects of adding Ti on the Fe-12Cr-6Al's melt pool dynamics, microstructure, precipitate characteristics, oxygen/nitrogen content variation, and mechanical properties. Without Ti, the resulting melt pools exhibited a shallow and wide morphology, contrasting with the formation of compact and deeper melt pools in the presence with Ti. Furthermore, Ti-based nitrides yielded a discernible enhancement in grain refinement compared to Al-based nitrides. In-situ Al 2 O 3 , AlN, and AlN-O nano precipitates were synthesized within the Fe-12Cr-6Al matrix with the nitrogen process gas. However, adding Ti transformed the nanoparticles, resulting in TiN, TiAl-N, and Al 2 O 3 @TiN. The addition of Ti increased the oxygen content from 0.0051 to 0.0315 wt% and the nitrogen content from 0.02 to 0.08 wt%. In-situ synthesis of Ti-rich precipitates and the solid solution effect of Ti led to significant mechanical property enhancement, including a yield strength (YS) of ~109 MPa, ultimate tensile strength (UTS) of ~200 MPa, a total elongation (TE) of ~7.4%, and a Vickers hardness (HV) of ~47. This study offers compelling and thorough evidence regarding the in-situ synthesis of diverse nitride and oxide nano-precipitates. It explores how the addition of Ti to the FeCrAl alloy alters the types and shapes of nitride and oxide nano-precipitates and assesses the impact of these precipitates on the properties of the Fe-12Cr-6Al alloy.

Synthesis of nanosized t-ZrO2-TiN composite powder by In-situ selective ammonolysis method

SYNTHESIS OF T-Zro2-tin COMPOSITE NANOPOWDERS BY SELECTIVE NITRIDATION

Sol–gel Synthesis and Sintering of Nano-Size Li2TiO3 Powder

Preparation of ti-al based nanophase composite powder by mechanical alloying

Preparation of Ti/Al based nanophase composite powder by mechanical alloying

Synthesis of Nanopowders of Titanium Nitride by In-Situ Nitridation of Titanium Oxide

Preparation and Properties of CaTiO_3:Zn Nanoparticles Based on Sol-Gel Method

Preparation of nano-TiN powders by Ni-catalysed carbothermal reduction nitridation

In-situ Synthesis of Nanocrystalline TiC Powders, Nanorods, and Nanosheets in Molten Salt by Disproportionation Reaction of Ti(II) Species

Preparation of NiAl2O4/Al2O3 composite nanopowder

In-situ Synthesis of TiN and its Effects on Fe-12Cr-6Al in Laser Powder Bed Fusion

Synthesis of Single-Crystalline Pb(Zr0.52Ti0.48)O-3 Nanocrystals by Hydrothermal Method

Preparation and Characterization of Nano-Tio2 Powder

Novel synthesis of TiN fine powders by nitridation with ammonium chloride

Synthesis of Uniform Titanium Nitride Nanocrystalline Powders Via a Reduction–Hydrogenation–Dehydrogenation–Nitridation Route

Preparation and Characterization of TiB2/Al3Ti/Al2O3 Composite Nano-powder

SYNTHESIS OF ALUMINUM NITRIDE POWDER BY IN SITU REACTION

A fast and mild method to prepare d-Ti3C2Tx/ZnO composites at room temperature with excellent catalytic performance

Research on preparation process for the in situ nanosized Zr(Y)O2 particles dispersion-strengthened tungsten alloy through synthesizing doped hexagonal (NH4)0.33·WO3

Fabrication of NiO/ZrO2 nanocomposites using ball milling-pyrolysis method

Preparation of ZrN Nanopowders by Internal Gelation and Carbothermic Nitridation