Abstract:Silica aerogels generally exhibit poor mechanical properties, which seriously restrict their commercial use and makes it necessary to reinforce their structures to obtain materials strong enough to withstand mechanical stresses. The incorporation of polymers into silica aerogels is a promising approach due to the enhancement in mechanical strength afforded and the possibility of imparting the hydrophobicity of the polymers to the resulting aerogels. However, the processes typically employed to prepare polymer-reinforced silica aerogels are complex, arduous and costly, requiring multiple washing and soaking steps for the infiltration of the polymer precursors after gelation and supercritical drying. Additionally, diffusion problems can result in heterogeneity in aerogel monoliths due to the use of various cross-linked polymers and the autoclave-limited dimensions of aerogels. In this study, a facile sol–gel route was developed to fabricate a large (500 cm3) polymer–silica aerogel monolith that was stable under atmospheric conditions and suitable for machining. The synthesis of the polymer–silica aerogels began with a facile one-pot reaction involving resorcinol (R), formaldehyde (F), methyltrimethoxysilane (MTMS), and N-(β-aminoethyl)-γ-aminopropyl-trimethoxysilane (AEAPTES), followed by an ambient-pressure drying process. The resulting aerogels were characterised by nitrogen adsorption–desorption, scanning electron microscopy (SEM), contact angle, and thermal conductivity measurements, and the aerogel mechanical properties were evaluated by a unidirectional compression test. The Young's modulus of compression of the aerogels was observed to increase from 3.95 to 34.88 MPa with an increase in the density of the aerogels from 0.14 to 0.26 g cm−3. Simultaneously, the aerogels were observed to be superhydrophobic, with a contact angle as high as 168°, and exhibited low thermal conductivity (0.038 W m−1 K−1) and good absorption for organic liquids, which are critical characteristics for the practical application of aerogels, especially in energy-saving and oil-/chemical-cleanup practices.

Synthesis of ZrO2 aerogels by supercritical CO2 fluid drying technology

Characterization of High-Surface-Area Zirconia Aerogel Synthesized from Combined Alcohothermal and Supercritical Fluid Drying Techniques

In-situ acid catalysis strategy to achieve rapid ambient pressure drying preparation of aerogels

Transparent, Ultraflexible, and Superinsulating Nanofibrous Biocomposite Aerogels Via Ambient Pressure Drying

ZrC/C aerogel with high compressive strength by a carbothermic process

A novel low-cost method of silica aerogel fabrication using fly ash and trona ore with ambient pressure drying technique

Preparation and Characterization of High Surface Area Zro2 Aerogel Modified by Sio2

Silica aerogels formed from soluble silicates and methyl trimethoxysilane (MTMS) using CO2 gas as a gelation agent

Synthesis of Alumina Aerogels by Ambient Drying Method and Control of Their Structures

Low-density, high-strength and large-scaled monolithic carbon aerogels fabricated via modified ambient pressure drying

Preparation of Silica Aerogels Via Ambient Pressure Drying

Facile preparation of ZrCO composite aerogel with high specific surface area and low thermal conductivity

A Facile Strategy for Freeze-Drying Preparation of Silica Aerogel from Sodium Silicate

Preparation of sp2 carbon-bonded π-conjugated COF aerogels by ultrasound-assisted mild solvothermal reaction for multi-functional applications

Pore structure, thermal insulation and compressive property of ZrO 2 nanofiber aerogels with carbon junction fabricated by freeze drying

Ambient-pressure drying synthesis of large resorcinol–formaldehyde-reinforced silica aerogels with enhanced mechanical strength and superhydrophobicity

Self-catalyzed Gelling Synthesis of Aerogels with Inorganic and Organic Nanocomponents for Thermal Insulation and CO 2 Capture

Preparation of silica aerogel from rice hull ash by supercritical carbon dioxide drying

Fabrication and property of hydrophobic polyvinyl alcohol /clay aerogel via irradiation-crosslinking and ambient-drying

Effects of Surfactants on the Synthesis of Silica Aerogels Prepared by Ambient Pressure Drying

Preparation of ZrO 2 aerogels by L-malic acid and L-tartaric acid assistant sol–gel method