Abstract:Silica aerogels generally exhibit poor mechanical properties, which seriously restrict their commercial use and makes it necessary to reinforce their structures to obtain materials strong enough to withstand mechanical stresses. The incorporation of polymers into silica aerogels is a promising approach due to the enhancement in mechanical strength afforded and the possibility of imparting the hydrophobicity of the polymers to the resulting aerogels. However, the processes typically employed to prepare polymer-reinforced silica aerogels are complex, arduous and costly, requiring multiple washing and soaking steps for the infiltration of the polymer precursors after gelation and supercritical drying. Additionally, diffusion problems can result in heterogeneity in aerogel monoliths due to the use of various cross-linked polymers and the autoclave-limited dimensions of aerogels. In this study, a facile sol–gel route was developed to fabricate a large (500 cm3) polymer–silica aerogel monolith that was stable under atmospheric conditions and suitable for machining. The synthesis of the polymer–silica aerogels began with a facile one-pot reaction involving resorcinol (R), formaldehyde (F), methyltrimethoxysilane (MTMS), and N-(β-aminoethyl)-γ-aminopropyl-trimethoxysilane (AEAPTES), followed by an ambient-pressure drying process. The resulting aerogels were characterised by nitrogen adsorption–desorption, scanning electron microscopy (SEM), contact angle, and thermal conductivity measurements, and the aerogel mechanical properties were evaluated by a unidirectional compression test. The Young's modulus of compression of the aerogels was observed to increase from 3.95 to 34.88 MPa with an increase in the density of the aerogels from 0.14 to 0.26 g cm−3. Simultaneously, the aerogels were observed to be superhydrophobic, with a contact angle as high as 168°, and exhibited low thermal conductivity (0.038 W m−1 K−1) and good absorption for organic liquids, which are critical characteristics for the practical application of aerogels, especially in energy-saving and oil-/chemical-cleanup practices.

Fabrication and property of hydrophobic polyvinyl alcohol /clay aerogel via irradiation-crosslinking and ambient-drying

Facile fabrication of poly(vinyl alcohol) gels and derivative aerogels

Hydrophobic transition of soluble polymer aerogel composites

Ease-of-manufacture highly transparent thin polyvinyl alcohol aerogel

Facile Fabrication of Hydrophobic Polyvinylpolysilsesquioxane Aerogels with Improved Optical Properties

Synthesis of Hydrophobic Silica Aerogels via Ambient Pressure Drying

Ambient-pressure drying synthesis of large resorcinol–formaldehyde-reinforced silica aerogels with enhanced mechanical strength and superhydrophobicity

Facile Synthesis of Flexible and Hydrophobic Polymethylsilsesquioxane Based Silica Aerogel Via the Co-Precursor Method and Ambient Pressure Drying Technique

A novel low-cost method of silica aerogel fabrication using fly ash and trona ore with ambient pressure drying technique

Facile Synthesis of Large-Sized Monolithic Methyltrimethoxysilane-Based Silica Aerogel Via Ambient Pressure Drying

Preparation of High‐hydrophobic Polyvinyl Alcohol‐based Composite Aerogel Fibers Containing Organosilicon for Effective Thermal Insulation

Facile preparation of attapulgite‐based aerogels with excellent flame retardancy and better thermal insulation properties

Fabrication of Hydrophobic Alumina Aerogel Monoliths by Surface Modification and Ambient Pressure Drying

Transparent, Superflexible Doubly Cross-Linked Polyvinylpolymethylsiloxane Aerogel Superinsulators Via Ambient Pressure Drying.

Preparation and Characterization of Hydrophobic Silica Aerogel by Ambient Pressure Drying Method

Hydrophobic Flexible Silica Aerogels Felts Fabricated by Ambient Pressure Drying

Ultralight and Flexible Monolithic Polymer Aerogel with Extraordinary Thermal Insulation by A Facile Ambient Process

Emulsion-templated, hydrophilic and underwater oleophobic PVA aerogels with enhanced mechanical property

Preparation of ambient-dried multifunctional cellulose aerogel by freeze-linking technique

The preparation of hydrophobic alginate-based fibrous aerogel and its oil absorption property

Synthesis of alumina aerogels from AlCl 3 ·6H 2 O with an aid of acetoacetic-grafted polyvinyl alcohol