Abstract:Electron beam lithography is a critical technology for achieving high-precision nanoscale patterning. The presence of resist residues in the structures can significantly affect subsequent processes such as etching and lift-off. However, the evaluation and optimization of resist residues currently relies on qualitative observations like scanning electron microscopy (SEM), necessitating multiple experiments to iteratively optimize exposure parameters, which is not only labor-intensive but also costly. Here, we propose a quantitative method to evaluate resist residues. By processing the obtained SEM images using a threshold segmentation algorithm, we segmented the resist structure region and the residual resist region in the images. The grayscale values of these two regions are identified, and the residues are quantified based on the ratio of these values. Furthermore, a relationship curve between the residue amount and the exposure dose is plotted to predict the optimal exposure dose. To validate this method, we fabricated hydrogen silsesquioxane annular grating structures with 30 nm linewidth and analyzed the residue levels over an exposure dose range of 2000-2500μC cm-2, predicting the optimal dose to be 1800μC cm-2and confirming this through experiments. Additionally, we applied the method to polymethyl methacrylate and ZEP-520A structures, achieving similarly accurate results, further confirming the method's general applicability. This method has the potential to reduce experimental costs and improve yield and production efficiency in nano fabrication.

Process Study of ZEP520 Positive Electron-Beam Resist and Its Application in Single-Electron Transistor

Process Study of ZEP520 Positive Electron Beam Resist

Y Shape Gate Formation in Single Layer of Zep520a Using 3d Electron Beam Lithography

Spacer Side-wall Processed 0.15 Μm GaN HEMT for Ka-band Application

Precisely-controlled Fabrication of Single ZnO Nanoemitter Arrays and Their Possible Application in Low Energy Parallel Electron Beam Exposure.

A process study of electron beam nano-lithography and deep etching with an ICP system

Fabrication and Characteristics of Soi-Based Single-Electron Transistor with In-Plane Side Gates

Fullerene-Containing Electrically Conducting Electron Beam Resist for Ultrahigh Integration of Nanometer Lateral-Scale Organic Electronic Devices

High-selectivity pattern transfer processes for self-assembled monolayer electron beam resists

The exposure process study of 100KV JBX-6300LS electron-beam nanolithograph system

Fabrication and Characterization of a Single Electron Transistor Based on a Silicon-on-Insulator

CO2‐Based Dual‐Tone Resists for Electron Beam Lithography

Nanotube and Nanowire Transistors

Process Research of Novel Electron Beam Lithography Resist Calixarene Used in Nanofabrication

Nanometer Scale Pattern Replication Using Electron-Beam Direct Patterned Sio2 As the Etching Mask

Scanning Probe Lithography Patterning of Monolayer Semiconductors and Application in Quantifying Edge Recombination

Quantitative evaluation of residual resist in electron beam lithography based on scanning electron microscopy imaging and thresholding segmentation algorithm

Coulomb Staircases and Differential Conductance Oscillations in A Simox-Based Single-Electron Transistor

Fabrication And Characterization Of Single Electron Transistor On Soi

The Application of Optical Resolution Enhancement Technology and E-Beam Direct Writing Technology in Microfabrication

Study of Silicon Nitride Inner Spacer Formation in Process of Gate-all-around Nano-Transistors