Abstract:The phase structure in the interface zone of Cu-Al composite plate was studied by EBSD after casting and rolling and different heat treatment temperatures. The grain sizes of the matrix and intermetallic compounds in the interface zone were analyzed statistically. The spatial distribution characteristics of the transverse, rolled, normal and various phases were characterized by inverse pole diagram.The results show that with the increase of heat treatment temperature, the phase of the interfacial area of the composite plate is rearranged, the residual stress can be released, and the zero resolution decreases.The interface zone of cast-rolled Cu-Al composite plate is composed of a layer of intermetallic compound, which is Al 2 Cu;Two layers of intermetallic compounds, both Al, were formed in the interfacial area after heat treatment at 300°C and 400°C Al 2 Cu and Al 4 Cu 9 ;After heat treatment at 450°C, the interface region is composed of three layers of intermetallic compounds, which is Al 2 Cu, AlCu, Al 4 Cu 9 ;The grain size of copper matrix is obviously larger than that of aluminum matrix.Matrix aluminum, matrix copper, Al 2 Cu.The average grains of Cu are mostly large Angle grain boundaries, and the orientation difference of adjacent grains in aluminum layer is much smaller than that in copper layer. After heat treatment at 300°C for 1 hour, the recrystallization degree of the interface zone of Cu-Al composite plate is low.After heat treatment at 400°C for 1 hour, the recrystallization in the interfacial zone of Cu-Al composite plate is not complete;After annealing at 450°C for 1 h, the subgrain boundaries in the aluminum layer grow up, and LAGB is basically converted to HAGB.The distribution characteristics of the characteristic appearance direction in the crystal space of each phase were characterized under the conditions of casting and rolling and different heat treatment temperatures.At the same time, the research results provide theoretical basis and scientific title for optimizing the preparation process and high-end application of Cu-Al composite plate.

Phases Interface in Deformation Processed Cu–15 Wt.%cr Composite Prepared by Elemental Powders

Deformation-induced Interfacial Transition Zone in Cu/V Nanolamellar Multilayers

Modifying Element Diffusion Pathway by Transition Layer Structure in High-Entropy Alloy Particle Reinforced Cu Matrix Composites

Dislocation assisted face-centered-cubic/body-centered-cubic interface mixing during severe plastic deformation

Structures, Properties and Responses to Heat Treatment of Deformation Processed Cu-15% Cr Composite Powders Prepared by Mechanical Milling

Performance of a Hierarchically Nanostructured W–Cu Composite Produced via Mediating Phase Separation

Deformation Processed Cu-15 Wt Pct Cr Composite Synthesized by Hot Hydrostatic Extrusion of Mechanical Milled Powders

Co-deformation in Cu–6 Wt.% Ag Nanocomposites

Interface characterization and mechanical properties of Mo-added chromium carbide-nickel composite

Enhancing strength-ductility properties of immiscible W-Cu composite by creating low-energy phase interfaces

Interfacial structure evolution of the growing composite precipitates in Al-Cu-Li alloys

Improvement of Interfacial Bonding and Mechanical Properties of Cu-Al2o3 Composite by Cr-Nanoparticle-Induced Interfacial Modification

Improving the Mechanical Performance of Cu Cr Alloy by Dissolving Cu in the Cr Second Phase

Phase Transformation Characteristics Of Cu-Cr And Cu-Mo Binary Alloys During Mechanical Alloying

Interface evolution and strengthening of two-step roll bonded cu/Al clad composites

Study on the Phase Structure of the Interface Zone of Cu-Al Composite Plate in Cast-rolling State and Different Heat Treatment Temperatures Based on EBSD

Role of Cr on the interfacial bonding, mechanical, and electrochemical corrosion properties of Cu matrix composites co-reinforced by Al2O3 whisker and graphene: combined experiments and first-principles calculations

Understanding wetting mechanism of pure Cu on C/C composites modified by chromium carbide

Study on strengthening and toughening mechanisms of cu/Al composites dominated by interface layer

Characterization of the interfacial micro-zones in C18150Cu/8011Al laminated composites