Abstract:The metastable dual phase FeMnCoCr high entropy alloy (HEA) has attracted great attention since it was first proposed, as it can overcome the strength-ductility trade-off at room temperature. For materials in engineering applications, it is also important to achieve high corrosion resistance while maintaining good mechanical properties. In this study, we simultaneously improved the mechanical properties and corrosion resistance of a FeMnCoCr-based HEA via Cu alloying and by applying a simple processing route that combined cold rolling and partial recrystallization annealing. The alloy doped with 0.3 at.% Cu and processed by annealing at 650 °C for 3 min exhibited the best combination of strength and ductility, i.e., yield strength of 768 MPa, tensile strength of 960 MPa and uniform elongation of 33.6%. The high yield strength majorly originated from high density dislocations and grain boundaries in the material, while the formation of deformation twins, martensite laths, stacking faults and Lomer Cottrell locks contributed to the continuous strain hardening and good ductility. The addition of Cu also enhanced corrosion resistance of the HEA in a NaCl solution by improving stability of the alloy matrix and elevating compactness of the passive film. The solid solution of Cu elevated equilibrium potential of the matrix and promotes transformation of microstructure from the face-centered cubic (fcc) plus hexagonal close-packed (hcp) dual phases to the fcc single phase, effectively inhibiting the accelerated corrosion of micro galvanic couple between different phases and enhancing stability of the matrix. At the same time, the enrichment of CuO in the inner layer of the passive film reduced the defect density within the Fe-rich oxide layer, improving the protection of the passive film against the matrix.

Modifying Element Diffusion Pathway by Transition Layer Structure in High-Entropy Alloy Particle Reinforced Cu Matrix Composites

Investigation into Reciprocating Dry Sliding Friction and Wear Properties of Bulk CoCrFeNiMo High Entropy Alloys Fabricated by Spark Plasma Sintering and Subsequent Cold Rolling Processes: Role of Mo Element Concentration

Microstructure and properties of FeCoNiCrAl high-entropy alloy particle-reinforced Cu-matrix composites prepared via FSP

Effect of C additions to the microstructure and wear behaviour of CoCrFeNi high-entropy alloy

Formation mechanism of interdiffusion layer and mechanical properties of Al 0.6 CoCrFeNi high-entropy alloy/Ti composites

Cu alloying enables superior strength-ductility combination and high corrosion resistance of FeMnCoCr high entropy alloy

Effect of FeCoNiMnCr High-Entropy Alloy Reinforcement on Mechanical, Wear, and Thermal Expansion Behavior of Copper Matrix Composites

Investigations on the microstructures and tribological behaviors of as-cast CrFeCoNiCu x high entropy alloys

Preparation and properties of CrNiWMoCoTi gradient high entropy alloy layer by plasma surface metallurgy

Effect of Al Elements on the Microstructure and Properties of CoCrNiCuMoAlx High-Entropy Alloys

Effect of Alloying Elements on Microstructure, Mechanical and Damping Properties of Cr-Mn-Fe-V-Cu High-Entropy Alloys

Influence of Cu and Co addition on metallurgical and wear characteristics of AlCrFeNi high entropy alloy

Effects of C and Mo on Microstructures and Mechanical Properties of Dual-Phase High Entropy Alloys

Realizing excellent tribological properties of BCC/FCC gradient high -entropy alloy coating via an in-situ interface reaction

Improving Mechanical Properties of Co-Cr-Fe-Ni High Entropy Alloy via C and Mo Microalloying

The Microstructures and Properties Changes Induced by Al:Co Ratios of the Al CrCo FeNi High Entropy Alloys

Microstructure, Mechanical Properties And Tribological Properties Of Nialcomposites Reinforced By Crmnfeconihigh-Entropy Alloy

The microstructural evolution and enhanced mechanical properties of in-situ Ti(C, N)-reinforced CoCrFeNiTi high-entropy alloy composites fabricated via mechanical alloying and spark plasma sintering

Comparative study of the microstructure and phase evolution of FeCoCrNiAl high-entropy alloy-matrix WC nanocomposite powders prepared by mechanical alloying

Effects of Cu Additions on Microstructure and Mechanical Properties of As-Cast CrFeCoNiCux High-Entropy Alloy

Microstructure and Compressive Deformation Behavior of As-Cast CrFeCoNiCux High Entropy Alloys