Abstract:Accurate measurements of particle diameter are necessary for quantitative characterization of key aerosol properties including the Cunningham slip correction factor, charging probability, diffusion coefficient, coagulation coefficient, and optical properties. In this study, we use four techniques to measure the diameter of nominal 100 nm reference spheres having a distributional standard deviation of less than 2 nm. The instruments used are a differential mobility analyzer (DMA), atomic force microscopy (AFM), scanning electron microscopy (SEM), and an electrical-gravitational aerosol balance (EAB). All four measurements are traceable to SI units at National Institute of Standards and Technology (NIST) or at National Institute of Advanced Industrial Science and Technology (AIST). This study includes quantitative estimates of the measurement uncertainty for each technique. It finds that the measured average particle diameter is within 3% for all the methods, with at least some overlap in all the estimated uncertainties using a 95% confidence interval. Nevertheless, the difference between the EAB results and the other methods may become significant as they are separately intended to be used in the manner described here for the traceable certification of future nanoscale particle size standards. Possible reasons for the differences are incorrect or inadequate accounting for surface residue for aerosol measurements, adhesion-force distortion for the AFM measurements, e-beam shrinkage for the SEM measurements, slip correction uncertainty for the DMA, and work function variability of the electrodes for the EAB.

Comparison and research of grain size measurement of ultrafine powder

Research of the technology on different characterization of particle size

Particle sizing with spectral analysis on the transmission fluctuations

Measurement Results Comparison Between Laser Particle Analyzer and Sieving Method in Particle Size Distribution

Inquiring into dispersion mode of ultra-fine particles with grain size small than 2 μm

Particle Size Analysis of Micro-Nano Dispersion System

Size detection of diamond powder by laser particle size measurement

Results and Evaluation of Particle Conjunction Measured by Laser Diffraction Particle Size Analyzer

Comparison of various particle sizing techniques

Design and Research of In-process Particle Size Measurer

Comparison of Three Conventional Measurements of Ultrafine- particle Diameter

Study on Preparation of Size-Controllable Spherical Ag Powders with High Tap Density

Research on the Electrostatic Dispersion of Barium Ferrite Magnetic Powder

3D Shape and Size Characterization of Micron-Sized Coal Particle with XRCT and SH

Principle of Laser Scattering and Its Application in Ultrafine Particle Size Analysis

Application of laser diffraction method in particle size determination for ion exchange resins

Effects of Ultrasonic Dispersion on Granulometry of Fine-grain Loess

Investigation of Particle Size of Ni Nanopowders

Surface Characterization of Corn Stalk Superfine Powder Studied by FTIR and XRD

Effect of particle shape on the particle size distribution measured with commercial equipment

Measurement of 100 nm monodisperse particles by four Accurate methods: Traceability and uncertainty