Abstract:Uniform and conformal deposition of tin oxide thin films is important for several applications in electronics, gas sensing, and transparent conducting electrodes. Thermal atomic layer deposition (ALD) is often best suited for these applications, but its implementation requires a mechanistic understanding of the initial nucleation and subsequent ALD processes. To this end, in situ FTIR and ex situ XPS have been used to explore the ALD of tin oxide films using tributyltin ethoxide and ozone on an OH-terminated, SiO2-passivated Si(111) substrate. Direct chemisorption of tributyltin ethoxide on surface OH groups and clear evidence that subsequent ligand exchange are obtained, providing mechanistic insight. Upon ozone pulse, the butyl groups react with ozone, forming surface carbonate and formate. The subsequent tributyltin ethoxide pulse removes the carbonate and formate features with the appearance of the bands for CH stretching and bending modes of the precursor butyl ligands. This ligand-exchange behavior is repeated for subsequent cycles, as is characteristic of ALD processes, and is clearly observed for deposition temperatures of 200 and 300 °C. On the basis of the in situ vibrational data, a reaction mechanism for the ALD process of tributyltin ethoxide and ozone is presented, whereby ligands are fully eliminated. Complementary ex situ XPS depth profiles confirm that the bulk of the films is carbon-free, that is, formate and carbonate are not incorporated into the film during the deposition process, and that good-quality SnOx films are produced. Furthermore, the process was scaled up in a cross-flow reactor at 225 °C, which allowed the determination of the growth rate (0.62 Å/cycle) and confirmed a self-limiting ALD growth at 225 and 268 °C. An analysis of the temperature-dependence data reveals that growth rate increases linearly between 200 and 300 °C.

Nanosized tin oxide sensitive layer prepared by reactive direct current magnetron sputtering of tin

P-type Tin–indium Oxide Films Prepared by Thermal Oxidation of Metallic InSn Alloy Films

Low Resistivity Transparent Conducting CdO Thin Films Deposited by DC Reactive Magnetron Sputtering at Room Temperature

Properties of Nanosized Tin Oxide Thin Film Prepared by Reactive Magnetron Sputtering

Microstructure Formation and Characterization of Nano-Tin Oxide Thin Films Prepared Using Different Concentration

The Effect of Calcination Temperature on Nanosized Tin Oxide Thin Film

Preparation and Characterization of P-Type Semiconducting Tin Oxide Thin Film Gas Sensors

Hydrothermal Preparation and Characterization of Nanocrystalline Porous Tin Dioxide Thin Films

Electrodeposition of Sno2 Thin Films from Aqueous Tin Sulfate Solutions

Vacuum-Free Liquid-Metal-Printed 2D Semiconducting Tin Dioxide: The Effect of Annealing

Microstructural and Functional Stability of Large-Scale SnO2:F Thin Film with Micro-Nano Structure

Preparation of Tin-Based Oxides Thin Films and Its' Electrochemical Properties

Formation of Pb0.6sr0.4(Ti0.97mg0.03)O-2.97 Thin Films on Assembled Bottom Electrodes with Titanium Silicide Nanowires

Investigation of microstructure evolution in Pt-doped TiO2 thin films deposited by rf magnetron sputtering

Study of zinc tin oxide thin-film transistor

Reaction Mechanisms of the Atomic Layer Deposition of Tin Oxide Thin Films Using Tributyltin Ethoxide and Ozone

Preparation of Nano-Structured BaTiO3 Thin Film by Electrophoretic Deposition and Its Characterization

Examining the Effect of Thermal Treatment on the Surface Morphology and Structural Properties of Tin Dioxide Thin Films Grown Using an Economical Spray Deposition Method

Structural, Morphological and Optical Characterization of Tin Doped Zinc Oxide Thin Film by (SPT)

A Co-operative Synthesis Approach to Prepare Tin Oxide Thin Films by Thermal Evaporation, Muffle Furnace Technique and Its Glucose Sensing Applications

Tin Oxide Modification of Indium Oxide Gas Sensitive Layers to Increase Efficiency of Gas Sensors